mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 01-26-2013, 07:16 PM   #1 (permalink)
Doesn't care (/◕ヮ◕)/
 
JLuke's Avatar
 
Join Date: Oct 2010
Location: Lafayette, La

CCM Fan
AKA Fan
DM7 trigger wont fit

Just bought a cp trigger for my DM7, it looks like the pictures but for the life of me i cannot get it to fit, it hits the frame before it activates the microswitch. Any suggestions? are the other dm triggers that radically different?
__________________
Feedback


I don't always play pump, but when I do, I prefer a rotor.....stay agg my friends.
JLuke is offline   Reply With Quote
Old 01-26-2013, 07:28 PM   #2 (permalink)
No Effects, just cooler
 
nofxkid2005's Avatar
 
Join Date: Nov 2008
Location: Vancouver

pics?
__________________
->"Behind The Mask" Paintball Documentary<-



Ryan Dupras
-Dealings Feedback-
Proudly Playing For:
Wookie Dicks
Lucha Cabras
nofxkid2005 is offline   Reply With Quote
Old 01-26-2013, 07:49 PM   #3 (permalink)
Doesn't care (/◕ヮ◕)/
 
JLuke's Avatar
 
Join Date: Oct 2010
Location: Lafayette, La

CCM Fan
AKA Fan


thats the trigger, already put the gun back together so i dont have pics of that. but basically that section connecting the trigger and the micro switch activator touches the frame along the bottom side of that trigger part. Basically when i put the trigger pin in, its fairly tight and the trigger is locked in place and has no room to swing.
__________________
Feedback


I don't always play pump, but when I do, I prefer a rotor.....stay agg my friends.
JLuke is offline   Reply With Quote
Old 01-26-2013, 08:05 PM   #4 (permalink)
Post Whore
 
martix_agent's Avatar
 
Join Date: Apr 2009
Location: Lafayette, Indiana
Send a message via AIM to martix_agent

I had a Critical trigger like that. I filed down the front end of it, and elongated the groove for it in the trigger frame. That gave it room to move.
__________________
martix_agent is offline   Reply With Quote
Old 05-15-2013, 05:55 PM   #5 (permalink)
Newbie
 
Join Date: May 2013
Location: Mililani Hawaii

for the cp triggers on the DM7/8, I've had to sand down where it's making contact on the upper part of the trigger, should be right above the bearing where it's making contact. Had the same issue on both my wife's and my own personal markers. First time I ran into the issue was in the DM7... see if you can't find where it's snagging (like I said, it should be right by the bearing) and see if it's feasable for you to sand it down to make it work. I've managed to do so on mine, since the rake trigger from cp is my favorite, and I refuse to go elsewhere. Let me know what you find please, if you can't see the problem there, let me know and I'll take mine apart to verify what I had to do.
__________________
CCI Phantom - No Mods
DYE DM8 - Virtue Board, TechT bolt, CP Rake Trigger
DYE DMC - No Mods
DYE DM7 - Virtue Board, BeOranged bolt
Dangerous Power G3 - TechT bolt, CP Reg
Planet Eclipse EGO 6 - Slightly modded trigger frame for big fingers...

WTT DMC/EGO 6/ or G3 for a Dust black CCM S6 (No mods, don't need barrel) Pst me if you're willing to do a trade, will add if needed.
Draxxusc3 is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Dye

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 11:48 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC