| ||Thread Tools||Search this Thread|
|08-22-2013, 07:29 PM||#1 (permalink)|
Evil Omen Techmaster
Join Date: Nov 2010
07 PMR solenoid venting.
Alright, this pmr has been working well for a few years now. Replaced the battery/microswitch harness and since I did that, it's been venting from the noid.
It will hold enough pressure for the bolt to go forward half way in the breech and come back, and it won't leak. However, it won't send the ball down the barrel. When I raise the hpr, it starts venting from the noid area.
The higher input, the larger the vent.
What do I need to do?
I Fix Evil Omen's For Free.
|10-25-2013, 04:37 PM||#2 (permalink)|
Step over the line...
Join Date: Jul 2013
Location: Winter Springs, FL
open up the noid body and make sure the oring in there isn't pinched/damaged or anything.
Are you sure the "venting" is coming out of the noid?
I'd break into that and clean it up, if that doesn't solve it then I don't know what to tell ya.
Honesty and Integrity are the basis of a true man. You cannot have one and expect the other. Both must be earned and fought for. It is not easy, nor should it be. I will not be tempted into making the easy decisions over the right ones
|10-25-2013, 04:52 PM||#3 (permalink)|
I have had this problem with the bolt sail oring actually leaking. It makes it vent out if the noid. If it isn't that the. Check the 3 outside o rings around the firing end of the can. If none of those work then check that the noid isn't dirty/dry. Noid rings are tiny and easily damaged so messing with those is kind of a last resort thing.
|Thread Tools||Search this Thread|