| ||Thread Tools||Search this Thread|
|04-15-2014, 08:08 PM||#1 (permalink)|
Join Date: Dec 2010
Location: N. Phoenix
PMR 2011 tophat mod
Sorry, Guys if this has come up before tired of looking at all the sites today.
just want to know if anyone has done or tried this mod and what are the results
Never argue with an idiot. They drag you down to their level, then beat you with experience.
|04-23-2014, 03:36 PM||#3 (permalink)|
Join Date: Mar 2009
Location: Santa Cruz Mountains
I've found most of my PMRs with stock bolts are very hard to get up to 300fps without increasing the OP to the point of the noids venting or increasing the dwell alot higher than stock
I'd be curious to see someone try this,I've seen it done with good results on PM series markers
I'm not THAT Punisher!!
If a Dremmel had t*ts Id marry one!
|04-23-2014, 05:00 PM||#5 (permalink)|
No Effects, just cooler
Join Date: Nov 2008
As far as I understand the top hat mod, you decrease shot volume... It seems to me this would have the exact opposite effect of what you're trying to achieve.. theory would say that a lower volume would require a higher pressure to achieve the same velocity... You're dwell would have to stay approximately the same though just based on how the marker operates..
What settings are you currently running?
|Thread Tools||Search this Thread|