mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Dye (http://www.mcarterbrown.com/forums/dye/)
-   -   Spool valve animation (http://www.mcarterbrown.com/forums/dye/404-spool-valve-animation.html)

jhyan 04-12-2006 02:02 PM

Spool valve animation
 
This is a great lil animation for those wanting to understand how the Fuse bolt in a Dye Matrix works (it's pretty close to the older matrixes... just fused!).

Imagine this going twenty times in a second!

http://img.photobucket.com/albums/v4...ted-medium.gif

slower
http://img.photobucket.com/albums/v4...mated-slow.gif

amargio1 04-22-2006 08:13 AM

that is the whole gun in fact...just clean bolt and lube and that is a machine

Phantom Power 04-22-2006 12:16 PM

I've never owned a spool valve marker, nor do I care to, but it looks like there are an awful lot of o-rings in there. Do people find that these leak often ? How regularly do you have to replace o-rings ?

cooter 04-25-2006 02:37 PM

There's 7 that actually move with every shot. They don't require much attention at all. Simple cleaning and lubing keeps it perculatin'. The 2 adjacent to the center of the bolt (bolt sail) are just bumpers.

The entire line shoots quiet and very consistently straight.

Cool animations too Jhyan

jhyan 04-25-2006 04:34 PM

The only credit I can take for the animations are finding them on the net and saving them to my hard drive. I think someone on Matrixowner.com did them.

As for the o-rings... they can be tempermental if you don't treat em right, but I've never shot a marker as smooth as my DM, so it's a trade off, possibly finickyness (word?) vs. amazing performance.

The only o-rings I've had issues with were with the front inside oring that the bolt rides on and the second to furthest back outer o-ring (marker was recharging super super slow... pulled the bolt out and found it stuffed most of the way into the hole that provides the air... no idea how that happened!)

Cunha 10-24-2006 10:53 PM

When is someone going to hijack a dye bolt setup and make it a mechanical marker with a pneumatic trigger...like a better nova.

FeedTheDogg 03-15-2007 02:37 AM

Quote:

When is someone going to hijack a dye bolt setup and make it a mechanical marker with a pneumatic trigger...like a better nova.
I believe someone has...in...tawain, or something.

http://www.airchallenger.com/htm/PAGE2mg604.htm

The grammer on their site is awfull, geez, if you can't speak english find some employees that are bilingual.

From the homepage

"AIR CHALLENGER have established well known reputation resulting from the consistent policy of high efficient,require low maintenance,have durable finishes and are friendly to the environment."

Havocx 03-15-2007 11:03 AM

it kinda makes me want one. I want to know how they get it to cycle. 3way in the trigger frame maybe?

On the note of bad grammer. I've worked in a Toyota plant (Cambrigde) and all of the signs that come over on equipment from Asia have poor grammer it leads me to believe there was no literal translation for some words into english

Surestick 03-15-2007 11:52 AM

It seals the dump chamber when the bolt is forward so a 3-way in the trigger frame should work.

Rothstein 03-15-2007 12:04 PM

Quote:

Originally Posted by FeedTheDogg (Post 117458)
I believe someone has...in...tawain, or something.

http://www.airchallenger.com/htm/PAGE2mg604.htm

The grammer on their site is awfull, geez, if you can't speak english find some employees that are bilingual.

From the homepage

"AIR CHALLENGER have established well known reputation resulting from the consistent policy of high efficient,require low maintenance,have durable finishes and are friendly to the environment."


The number one place for bad english grammar from the orient.
http://www.engrish.com/


All times are GMT -4. The time now is 07:19 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC