| ||Thread Tools||Search this Thread|
|09-15-2008, 07:01 AM||#2 (permalink)|
Join Date: Dec 2006
The EGO5/6 and Etek grips will fit with some modifications. They do not have the rounded out area for the sear solenoid. You will have to grind out the inside of the grip to fit them.
|09-23-2008, 04:21 PM||#3 (permalink)|
Join Date: Apr 2008
Location: Chicagoland USA
If by "old cocker" you mean Eblade frames then yes they will but you need to remove a little bit of material from the grip. This is where the solenoid sits in the frame. You can use a Dremel with a big sanding wheel. Hope this helps.
'When you're pushed...pumpins as easy as breathin'
Buy my CCM pump stuff!
MCB Feedback 10+ 0-
Ebay Feedback = eBay My World - zed-9
|Thread Tools||Search this Thread|