PRICE DROP - Really Nice Custom HyperMag for Sale - NRA MEMBERS GET 10% OFF!

New_Guy · 01-05-2010, 04:55 AM

Sold! Sold! Sold!

You will get the gun as it looks in the pictures. Please note the custom "gills" done by Luke on AO a while back, and also the second detent slot (also by Luke). The foregrip is an uncommon one put out by Rogue. The grip panels are aluminum and made also by Luke. And (not pictured) I reamed out the bottom hole on the trigger frame so it can easily be turned on and off with your finger. You still have to adjust the modes with an allen wrench or some other tool though, as the top hole is uncut.

Also note it only comes with ONE DETENT. The other fell out during a game and it worked fine with my Rotor, so I never bothered to buy another one. If you plan on using a Halo, I highly recommend replacing it.

It also has an 80g switch installed. It is nice and light and crisp. Feels like any modern electro with it.

Comes with 13bps board and CENTERFLAG ON/OFF (really hard to find!) in a Classic valve with Lvl 7 (I have never once chopped).

It has only a couple really minor scratches typical with play. The only major cosmetic blemish is the scratch on the passenger side near the front of the gun. The blemish is not deep at all. A new ano would take care of it.

Now onto the pictures:

CenterFlag on/off:

I am looking for around $300. I would also like a Smart Parts Nerve. Must work, and must be in nice condition! NRA MEMBERS will recieve a 10% discount on this price! So if you're an NRA member, you get the gun for only $270 shipped!!! (You must send me a picture of your membership card. Name on card MUST be the same as the name in your PayPal!)

I take PayPal only. I will ship within a week of receiving payment USPS Priority with confirmation.

Please post and PM. Thank you all very much.

New_Guy · 01-06-2010, 03:45 AM

Bump. She is OBO, so feel free to offer up!

New_Guy · 01-15-2010, 04:48 AM

Price has been dropped! I'd like to send her off to a good new home!

New_Guy · 01-22-2010, 05:30 PM

Nobody wants her? Really? But she shoots so nicely!

SlvrDragon50 · 01-24-2010, 02:20 PM

Sig you add?

New_Guy · 01-25-2010, 03:14 AM

Sorry bud. Not a fan of Vices in general.

01-05-2010, 04:55 AM	#1 (permalink)
New_Guy Active Member Join Date: Oct 2009 Location: East Coast	PRICE DROP - Really Nice Custom HyperMag for Sale - NRA MEMBERS GET 10% OFF! Sold! Sold! Sold! You will get the gun as it looks in the pictures. Please note the custom "gills" done by Luke on AO a while back, and also the second detent slot (also by Luke). The foregrip is an uncommon one put out by Rogue. The grip panels are aluminum and made also by Luke. And (not pictured) I reamed out the bottom hole on the trigger frame so it can easily be turned on and off with your finger. You still have to adjust the modes with an allen wrench or some other tool though, as the top hole is uncut. Also note it only comes with ONE DETENT. The other fell out during a game and it worked fine with my Rotor, so I never bothered to buy another one. If you plan on using a Halo, I highly recommend replacing it. It also has an 80g switch installed. It is nice and light and crisp. Feels like any modern electro with it. Comes with 13bps board and CENTERFLAG ON/OFF (really hard to find!) in a Classic valve with Lvl 7 (I have never once chopped). It has only a couple really minor scratches typical with play. The only major cosmetic blemish is the scratch on the passenger side near the front of the gun. The blemish is not deep at all. A new ano would take care of it. Now onto the pictures: CenterFlag on/off: I am looking for around $300. I would also like a Smart Parts Nerve. Must work, and must be in nice condition! NRA MEMBERS will recieve a 10% discount on this price! So if you're an NRA member, you get the gun for only $270 shipped!!! (You must send me a picture of your membership card. Name on card MUST be the same as the name in your PayPal!) I take PayPal only. I will ship within a week of receiving payment USPS Priority with confirmation. Please post and PM. Thank you all very much. __________________ Proud member of the NRA ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄ Rude Boy ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀ My Hot-Rod: Black Promaster #92 - ICDU Ram, Bob Long Marq HPR, AKA SCMIII LPR, eBay Valve, Maddman Lightened Valve Spring, Custom Bolt Pin, Modified Bolt, Kila Drive Board, Kila Magnetic Detents & Eye Covers, CP Sling Trigger, CCM No-Pro Feedneck, Bob Long Gear Drive On/Off ASA, full Freak kit. All fed by my Dye Rotor Feedback Last edited by New_Guy; 01-30-2010 at 05:01 AM. Reason: Price Drop

01-06-2010, 03:45 AM	#2 (permalink)
New_Guy Active Member Join Date: Oct 2009 Location: East Coast	Bump. She is OBO, so feel free to offer up! __________________ Proud member of the NRA ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄ Rude Boy ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀ My Hot-Rod: Black Promaster #92 - ICDU Ram, Bob Long Marq HPR, AKA SCMIII LPR, eBay Valve, Maddman Lightened Valve Spring, Custom Bolt Pin, Modified Bolt, Kila Drive Board, Kila Magnetic Detents & Eye Covers, CP Sling Trigger, CCM No-Pro Feedneck, Bob Long Gear Drive On/Off ASA, full Freak kit. All fed by my Dye Rotor Feedback

01-15-2010, 04:48 AM	#3 (permalink)
New_Guy Active Member Join Date: Oct 2009 Location: East Coast	Price has been dropped! I'd like to send her off to a good new home! __________________ Proud member of the NRA ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄ Rude Boy ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀ My Hot-Rod: Black Promaster #92 - ICDU Ram, Bob Long Marq HPR, AKA SCMIII LPR, eBay Valve, Maddman Lightened Valve Spring, Custom Bolt Pin, Modified Bolt, Kila Drive Board, Kila Magnetic Detents & Eye Covers, CP Sling Trigger, CCM No-Pro Feedneck, Bob Long Gear Drive On/Off ASA, full Freak kit. All fed by my Dye Rotor Feedback

01-22-2010, 05:30 PM	#4 (permalink)
New_Guy Active Member Join Date: Oct 2009 Location: East Coast	Nobody wants her? Really? But she shoots so nicely! __________________ Proud member of the NRA ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄ Rude Boy ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀ My Hot-Rod: Black Promaster #92 - ICDU Ram, Bob Long Marq HPR, AKA SCMIII LPR, eBay Valve, Maddman Lightened Valve Spring, Custom Bolt Pin, Modified Bolt, Kila Drive Board, Kila Magnetic Detents & Eye Covers, CP Sling Trigger, CCM No-Pro Feedneck, Bob Long Gear Drive On/Off ASA, full Freak kit. All fed by my Dye Rotor Feedback

01-24-2010, 02:20 PM	#5 (permalink)
SlvrDragon50 Seasoned Member Join Date: Dec 2008	Sig you add? __________________ Redz 6 Piece Barrel Kit Autococker Micromag and Classic Mag!

01-25-2010, 03:14 AM	#6 (permalink)
New_Guy Active Member Join Date: Oct 2009 Location: East Coast	Sorry bud. Not a fan of Vices in general. __________________ Proud member of the NRA ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄ Rude Boy ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀ My Hot-Rod: Black Promaster #92 - ICDU Ram, Bob Long Marq HPR, AKA SCMIII LPR, eBay Valve, Maddman Lightened Valve Spring, Custom Bolt Pin, Modified Bolt, Kila Drive Board, Kila Magnetic Detents & Eye Covers, CP Sling Trigger, CCM No-Pro Feedneck, Bob Long Gear Drive On/Off ASA, full Freak kit. All fed by my Dye Rotor Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search