|Electronic If it uses batteries, and fires paintballs... This is the place to sell it.|
| ||Thread Tools||Search this Thread|
|04-29-2010, 12:22 PM||#1 (permalink)|
Fun SP Ion project I'm never going to finish...
Or you can call it almost 2 ions and a BE body sale if you'd like
I had this crazy dream of showing up to the field with a brass eagle Samurai with a Rotor sitting on top of it just to confuse the crazy speedball kiddies.
I started dremeling out the body to put things in, but never got farther then starting the cutouts for the main body... This thing has been sitting on a shelf for almost 6 months.
-One complete ion (the one in the middle of the pic), I even have the stock ASA and macro, just forgot to put them in the pic. It is 100% stock.
-Brass eagle Samurai Body (externally complete, internals are gone)
-Ion breach, can, and bolt (assembled, top left of pic)
-neon green grips
-Stock frame with aftermarket trigger (missing gauge)
-Ape Rampage board (trigger assembly is damaged, you can send it in for repair, but I was going to use it for the Samurai project and solder a new microswitch on some wires so the board could be placed somewhere other then beside the trigger)
-Stock board (broken, for parts)
-Virtue board (front barb is damage, it's a $20 repair from virtue [not covered under lifetime warranty, trust me, I already asked ])
-Couple questionable 9V (one in the complete ion that works)
-2 stock bodies
-Spare bits and pieces
With a reg, gauge, and one of the boards fixed you can have 2 working ions if you were so inclined. Here is a rough plan of my idea:
I was going to get a smaller reg to make fitment easier. Also not in the mock up is a 9v which would sit above where the reg is.
For Cash price let's say $150 shipped and PP'd OBO.
-Freak insert kit
-Small Freak inserts seperatly
-Phantom "L" stock(s)
-Phantom Wevo/CCI U/C kit w/ ALUMINUM grip only, not interested in the plastic pump.
-Phantom WWA 1 piece feed
-Phantom CCI Ghost Ring(s)
-Phantom CCM 86* frame
-DW Barrel (Ion/impulse threaded) less then 14"
-DW Barrel (Phantom threaded) 10" or 12" only
-Capless stock class packs/tube holders
-Tiberius first strike mags
-Xvalve w/ L10
-Might be interested in some markers... pumps mostly but I'd look at anything.
That's all I can think of that I need, but feel free to offer anything... Just don't be surprised if I'm not interested in much else
Thanks for looking!
Last edited by Redbeard the Pirate; 04-30-2010 at 11:55 AM.
|04-29-2010, 12:27 PM||#2 (permalink)|
MCB member U MEMMMBER?
Join Date: Feb 2010
That Sam would be the fastest one made.....talk about a SLEEPER!
using micro line inside would get this thing going....not bad!
Don't mess with the OLD ones.....
collecting another few mags for my Gun WHORE status!!
I ship fast & pay on time....everytime!!
PAYPAL: PREMIUM VERIFIED USER
our work halloween pic as my Avi.......
|04-29-2010, 06:19 PM||#3 (permalink)|
I even had dreams of putting the APE button membrane on a sliding tray in the cocking handle at the back... but Hopefully someone will take this and finish it up!
It will definitely need a rotor though, they're the same kind of material so it looks strangely "right" sitting on it.
And putting macro in wast the plan, that hardline wasn't in a very good position to keep.
Oh, please Post if you're going to PM (No, not you oldskool )
|04-29-2010, 08:39 PM||#4 (permalink)|
Join Date: Jan 2007
Location: Needmore, PA
Do you want to part 1 breech, firing can, and Virtue?
|04-30-2010, 11:55 AM||#5 (permalink)|
|04-30-2010, 12:04 PM||#6 (permalink)|
wow, nice project, great idea.
too bad it didn't come to fruition.
Good luck with the sale.
|04-30-2010, 07:10 PM||#7 (permalink)|
This is a steal for almost 2 ions with a possible fun project!
|Thread Tools||Search this Thread|