|Electronic If it uses batteries, and fires paintballs... This is the place to sell it.|
| ||Thread Tools||Search this Thread|
|03-18-2007, 01:48 PM||#1 (permalink)|
Join Date: Mar 2007
project bko for sale or trade
well i have a bko i bought a while back. well i got it and a frame screw was super glued in so i drilled it out. later that day i took it to my garage to shoot and the one frame screw wasnt strong enough to hold it and it stripped that hole. also yanked a bunch of wires off the board and broke a pin. i soldered the wires directly to the board and it worked yesterday however the solenoid now leaks(i think its just a seal but i cant be certain.) also needs a feedneck.
big bolt out front is holding the frame to the tray. red bolt in back is cross threaded but holds.
my awsome soldering skills board should work. just get the wiring schematic off of pbn and see which ones go where. also has quick disconnects.
comes with a molex connector on noid that should fit boards like dm's and angel boards.
WILL PART just ask
price:50 shipped(definatly negotiable)
cocker 3 way and frame
tinted proflex lense
pgp ca adapter
cool bts and pieces
Last edited by Jolly Rodger; 03-18-2007 at 02:11 PM.
|Thread Tools||Search this Thread|