Pro-owned (Davey Williamson #3, Dynasty) CCM framed Dynasty NXT Shocker For Sale...

KeenDean · 10-13-2010, 04:20 PM

I have for sale a pro-owned Dynasty NXT Shocker, as used by Davey Williamson of Dynasty.

The marker was purchased from a guy here in the UK, who still had Davey's signature and proof of ownership, which I have and will obviously include with the sale.

This was going to be my "tinker & upgrade" project, but I "VERY" regretfully have to throw it up for sale.

It is pewter in colour, with black parts and comes with the following:

Dynasty NXT Pewter main body
Dynasty bolt guide
Smart Parts HE bolt kit
CCM 2" Mid-Rise feedneck, with Dynasty laser engraved clamping ring
Pewter Freak back
Dust Black 14" All American tip
.693 Freak insert
CCM RIP frame (very nice :P)
Blooline Industries 'Deville' grey grips.
Tadao Dynasty M6 board (will require flashing to latest software)
Reflective eye (because of M6 board, which can be flashed to accept break beam eyes)
Shocktech 'O' drop
Shocktech on/off ASA
Smart Parts vertical ASA
AKA 'Long' Sidwinder regulator.

Pictures:

Picture from the original owner, who I bought this from. Showing the components I replaced.

There are a few marks and scuffs on this marker, but nothing drastic. I have tried to show any wear in the pictures as best as I can. The top and rear of the main body has a few "very minor" dents/scuffs. Plus there is some spanner rash and wear around the feedneck. Other than that, this is marker is in very good condition.

My Asking Price is: SOLD... to Killian! UDOWN? over at IOG forum.

Please read the RULES:
a. Price includes PayPal fees and international shipping.
b. I have great feedback... buy with confidence

.
c. Asking price is fairly firm. If you want to make a genuine, and realistic offer, then by all means entertain me. The worst I can say is NO.
d. Item will be shipped as soon as the payment is received. Or at least when the post office is open

.
e. International first class shipping is my method of shipping. International tracking is expensive, and if you insist on it, you pay for it.
f. Shipping usually takes around 6-8 working days.
g. Item will be shipped in two consignments. This is too get around customs as well as reducing the shipping rates for an entire item in one package.
h. NO TRADES... unless it's that green folding stuff!
i. I will not entertain requests to 'part-out'.
j. By all means, send me a PM.

Thank's for your time...

Dean.

KeenDean · 10-15-2010, 02:31 PM

BUMP...

KeenDean · 10-21-2010, 03:58 PM

BUMP... asking price slashed from $325.00 to $300.00

KeenDean · 10-24-2010, 01:09 PM

BUMP...
Price dropped from $300.00 to $280.00.

Will also include a set of break beam NXT eye's, just incase any buyer manages to have, or get their hands on, a break beam compatible board.

KeenDean · 10-26-2010, 01:02 PM

BUMP...

Grave · 10-26-2010, 05:53 PM

Not sure what you mean by this, "Item will be shipped in two consignments. This is too get around customs as well as reducing the shipping rates for an entire item in one package."

KeenDean · 10-28-2010, 01:44 PM

The cost of shipping goes by the weight of the item. Any item over 1kg becomes extortionately expensive. So, I split the marker into two consignments, therefore each box is less than 1kg. Shipping the item complete is way more expensive than the combined cost for two consignments, believe it or not.

As for security... I have known of examples where if a marker is shipped in one consignment, light fingered package handlers see the customs declaration ticket, and see the package contains a complete paintball marker. No surprise then, that it tends to go missing.

In separate consignments, each box is marked up as "parts", so realistically who wants to steel a box of parts?

Customs charges usually apply to packages labelled as complete markers. If it's classed as parts,they usually tend to go through customs without raising eye brows, and incurring additional charges. Please note: this very rarely applied to consignments going to the states from the UK. But items comeing to me from the USA usually always incur extra charges.

That's the price I pay for all the best stores and sellers being in the USA, as well as my taste in rare and old school markers.

It wouldn't be an issue if I was an EGO fan boy... but I AIN'T

To date, with all my years of trading between the UK and USA, I've had no issues at all. My feedback confirms this, especially at IOG, where I'm a moderator and a major pain in the a** to my fellow IOG'ers LOL

.

KeenDean · 11-11-2010, 03:54 PM

SOLD... to Killian! UDOWN? over at IOG forum.

10-13-2010, 04:20 PM	#1 (permalink)
KeenDean Active Member Join Date: Mar 2009	Pro-owned (Davey Williamson #3, Dynasty) CCM framed Dynasty NXT Shocker For Sale... I have for sale a pro-owned Dynasty NXT Shocker, as used by Davey Williamson of Dynasty. The marker was purchased from a guy here in the UK, who still had Davey's signature and proof of ownership, which I have and will obviously include with the sale. This was going to be my "tinker & upgrade" project, but I "VERY" regretfully have to throw it up for sale. It is pewter in colour, with black parts and comes with the following: Dynasty NXT Pewter main body Dynasty bolt guide Smart Parts HE bolt kit CCM 2" Mid-Rise feedneck, with Dynasty laser engraved clamping ring Pewter Freak back Dust Black 14" All American tip .693 Freak insert CCM RIP frame (very nice :P) Blooline Industries 'Deville' grey grips. Tadao Dynasty M6 board (will require flashing to latest software) Reflective eye (because of M6 board, which can be flashed to accept break beam eyes) Shocktech 'O' drop Shocktech on/off ASA Smart Parts vertical ASA AKA 'Long' Sidwinder regulator. Pictures: Picture from the original owner, who I bought this from. Showing the components I replaced. There are a few marks and scuffs on this marker, but nothing drastic. I have tried to show any wear in the pictures as best as I can. The top and rear of the main body has a few "very minor" dents/scuffs. Plus there is some spanner rash and wear around the feedneck. Other than that, this is marker is in very good condition. *My Asking Price is: SOLD... to Killian! UDOWN? over at IOG forum.* Please read the RULES: a. Price includes PayPal fees and international shipping. b. I have great feedback... buy with confidence . c. Asking price is fairly firm. If you want to make a genuine, and realistic offer, then by all means entertain me. The worst I can say is NO. d. Item will be shipped as soon as the payment is received. Or at least when the post office is open . e. International first class shipping is my method of shipping. International tracking is expensive, and if you insist on it, you pay for it. f. Shipping usually takes around 6-8 working days. g. Item will be shipped in two consignments. This is too get around customs as well as reducing the shipping rates for an entire item in one package. h. NO TRADES... unless it's that green folding stuff! i. I will not entertain requests to 'part-out'. j. By all means, send me a PM. Thank's for your time... Dean. __________________ *Intimidation through dominationâ€¦the true meaning of being a timmy owner.* *Feedback:* *MCB* *IOG* *P8ntballer* *PbN(old)* *AOG* Last edited by KeenDean; 11-11-2010 at 03:53 PM. Reason: SOLD...

10-15-2010, 02:31 PM	#2 (permalink)
KeenDean Active Member Join Date: Mar 2009	*BUMP...* __________________ *Intimidation through dominationâ€¦the true meaning of being a timmy owner.* *Feedback:* *MCB* *IOG* *P8ntballer* *PbN(old)* *AOG*

10-21-2010, 03:58 PM	#3 (permalink)
KeenDean Active Member Join Date: Mar 2009	*BUMP... asking price slashed from $325.00 to $300.00* __________________ *Intimidation through dominationâ€¦the true meaning of being a timmy owner.* *Feedback:* *MCB* *IOG* *P8ntballer* *PbN(old)* *AOG*

10-24-2010, 01:09 PM	#4 (permalink)
KeenDean Active Member Join Date: Mar 2009	*BUMP...* Price dropped from $300.00 to $280.00. Will also include a set of break beam NXT eye's, just incase any buyer manages to have, or get their hands on, a break beam compatible board. __________________ *Intimidation through dominationâ€¦the true meaning of being a timmy owner.* *Feedback:* *MCB* *IOG* *P8ntballer* *PbN(old)* *AOG*

10-26-2010, 01:02 PM	#5 (permalink)
KeenDean Active Member Join Date: Mar 2009	*BUMP...* __________________ *Intimidation through dominationâ€¦the true meaning of being a timmy owner.* *Feedback:* *MCB* *IOG* *P8ntballer* *PbN(old)* *AOG*

10-26-2010, 05:53 PM	#6 (permalink)
Grave Active Member Join Date: Jun 2007	Not sure what you mean by this, "Item will be shipped in two consignments. This is too get around customs as well as reducing the shipping rates for an entire item in one package."

10-28-2010, 01:44 PM	#7 (permalink)
KeenDean Active Member Join Date: Mar 2009	The cost of shipping goes by the weight of the item. Any item over 1kg becomes extortionately expensive. So, I split the marker into two consignments, therefore each box is less than 1kg. Shipping the item complete is way more expensive than the combined cost for two consignments, believe it or not. As for security... I have known of examples where if a marker is shipped in one consignment, light fingered package handlers see the customs declaration ticket, and see the package contains a complete paintball marker. No surprise then, that it tends to go missing. In separate consignments, each box is marked up as "parts", so realistically who wants to steel a box of parts? Customs charges usually apply to packages labelled as complete markers. If it's classed as parts,they usually tend to go through customs without raising eye brows, and incurring additional charges. Please note: this very rarely applied to consignments going to the states from the UK. But items comeing to me from the USA usually always incur extra charges. That's the price I pay for all the best stores and sellers being in the USA, as well as my taste in rare and old school markers. It wouldn't be an issue if I was an EGO fan boy... but I AIN'T To date, with all my years of trading between the UK and USA, I've had no issues at all. My feedback confirms this, especially at IOG, where I'm a moderator and a major pain in the a to my fellow IOG'ers LOL . __________________ Intimidation through dominationâ€¦the true meaning of being a timmy owner. Feedback: MCB IOG P8ntballer PbN(old) AOG**

11-11-2010, 03:54 PM	#8 (permalink)
KeenDean Active Member Join Date: Mar 2009	*SOLD... to Killian! UDOWN? over at IOG forum.* __________________ *Intimidation through dominationâ€¦the true meaning of being a timmy owner.* *Feedback:* *MCB* *IOG* *P8ntballer* *PbN(old)* *AOG*

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search