mcarterbrown.com  

Electronic If it uses batteries, and fires paintballs... This is the place to sell it.

Reply
 
Thread Tools Search this Thread
Old 11-26-2012, 12:06 AM   #1 (permalink)
MCB Member
 
Riddler's Avatar
 
Join Date: Apr 2006
Location: pgh, pa

Rainman "BFG" Rainmaker - sold

Rainman "BFG" Rainmaker
Originally the pride and joy of Aluminum Gerbil, and more recently Hurtcow - sorry buddy, I just decided this was a bit too much of a project for me at this point, what with a newborn taking up what little free time my work allows me to have - what we have here is a very custom Rainman Rainmaker. It sports an Angel frame housing a Thunderboard LCD board that uses a single reflective ACE (but currently needs a new one), a custom frame/MAC/ASA mount, custom backblock that holds a 9v battery, PPS Stabilizer, Twister LPR, Angel-threaded feed post and Kapp high rise, 'cocker detent, Titanium bolt link, maddman valve, Mad Marty mods, an RC strut spring on the carrier that is claimed to increase cycle speed by 2bps, lots of custom milling, anodizing, etc. etc. etc. Lots of work went into this gun - I can't even imagine the original build cost of the thing.

Original matching massive Kapp drop is included, though not pictured. For what it's worth, the drop has some pitting in the ano. Pictured Dye SS barrel not included - a stock Rainmaker barrel (Infinity clone) will come with the marker.

I haven't gassed up the marker since receiving it. It looks to need just a little work/tuning. In addition to needing a new eye (though it will work w/o one), the on/off switch below the frame seems to be shot (damage from shipping, maybe?) and likely needs replaced, as it feels very wiggly and the gun isn't turning on.

The feedneck post was a touch loose in the body, so I put a dab of green loctite on it and reinstalled - it should be good to go, and it's Angel-threaded, so feel free to swap out the Kapp high rise for your clamping feed of choice.

I got this for a song from Hurtcow and am going to pass on the savings to the next owner: $275 shipped, firm, or $235 shipped w/o the Stabilizer. I'm also open to trading for a nice, custom 'cocker.

__________________
MCB feedback

Last edited by Riddler; 08-10-2013 at 12:02 PM.
Riddler is online now   Reply With Quote
Old 12-06-2012, 09:27 AM   #2 (permalink)
Active Member
 
nick5263's Avatar
 
Join Date: Apr 2012

pmd u
nick5263 is offline   Reply With Quote
Old 03-16-2013, 10:38 PM   #3 (permalink)
MCB Member
 
Riddler's Avatar
 
Join Date: Apr 2006
Location: pgh, pa

Still have this...
__________________
MCB feedback
Riddler is online now   Reply With Quote
Old 03-26-2013, 06:58 PM   #4 (permalink)
tribal monger
 
shifty's Avatar
 
Join Date: Nov 2006
Location: north richland hills, tx

CCM Fan
Brass and Wood Fan
PPS Fan
sent a message
__________________
MCB feedback
PBN old feedback
PBN new feedback
TOG feedback
Ebay feedback
Gun collection 54 not 1 newer than 2004.....Don't buy into the hype, faster and newer isn't always better.
Quote:
Originally Posted by Manning View Post
The tears of the Wally Lama render a mirror like finish to any bit of brass. When it's time to polish, Wally Lama thinks of all the neglected Sheridans out there and a tear falls from his eye onto his latest creation. Three children who were passing by witnessed this holy event once and we're all blinded by the brilliance of the brass. They all three heard Angels voices and accepted their calling as witnesses to the miracle of His divinity.
shifty is offline   Reply With Quote
Old 03-27-2013, 12:26 PM   #5 (permalink)
Ridin' The ShortBus
 
Jebus's Avatar
 
Join Date: Aug 2010
Location: Cowtown...up North

CCM Fan
Brass and Wood Fan
Kilt Club
PPS Fan
Wow!
__________________
My MCB Feedback
Project Mayhem is sponsored by: Rampage Paintball,Paintballgear.ca , and Skyline Nation .


Quote:
Originally Posted by ApoC_101 View Post
I'd date a girl with a cocker.
Quote:
Originally Posted by Slappadapink View Post
....bro, you just gave me a quarter chub.
Jebus is offline   Reply With Quote
Old 04-11-2013, 04:07 PM   #6 (permalink)
MCB Member
 
Riddler's Avatar
 
Join Date: Apr 2006
Location: pgh, pa

Boink! $235 and I keep the Stabilizer?
__________________
MCB feedback
Riddler is online now   Reply With Quote
Old 04-11-2013, 09:33 PM   #7 (permalink)
Un-Active Member
 
SEFishy's Avatar
 
Join Date: Jan 2007
Location: El Paso

Brass and Wood Fan
PPS Fan
Now this is different. How about a partial trade plus cash? I got a wall of cockers you might find something to your liking. Pming
__________________
Electros For Sale

Mechs For Sale
SEFishy is offline   Reply With Quote
Old 04-13-2013, 12:09 AM   #8 (permalink)
MCB Member
 
Jaccen's Avatar
 
Join Date: Aug 2011
Location: SW Ontario

Do you know which Mad Marty mods it has? Thanks.
__________________
MCB Feedback
Please ship to me using US Postal Service when shipping to Canada.
Don't ship to Canada? No worries--I can work it out with you: US Parcel Pickup

Jaccen is offline   Reply With Quote
Old 04-13-2013, 07:50 PM   #9 (permalink)
MCB Member
 
Riddler's Avatar
 
Join Date: Apr 2006
Location: pgh, pa

Quote:
Originally Posted by Jaccen View Post
Do you know which Mad Marty mods it has? Thanks.
Honestly I don't. I assume all of them?
__________________
MCB feedback
Riddler is online now   Reply With Quote
Old 04-13-2013, 08:37 PM   #10 (permalink)
Thick
 
HurtCow's Avatar
 
Join Date: Mar 2006
Location: Rocklin, CA
Send a message via AIM to HurtCow

CCM Fan
PPS Fan
Quote:
Originally Posted by Riddler View Post
Honestly I don't. I assume all of them?
All of them, plus the carrier was lightened by Aluminum Gerbil for faster cycling. There's an RC car shock spring in front of the carrier as well, to accomplish the same goal. Supposedly good for 18bps but I never bothered to find out.
__________________
Everybody loves me!

If I hurt your feelings or otherwise offended you, click here.
HurtCow is offline   Reply With Quote
Reply

  mcarterbrown.com » Buy, Sell, Trade » Electronic

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 11:30 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC