|Electronic If it uses batteries, and fires paintballs... This is the place to sell it.|
| ||Thread Tools||Search this Thread|
|06-02-2013, 04:33 AM||#1 (permalink)|
Join Date: Dec 2008
Great condition ICD promaster black - FS
Well, this is back up for sale for $50 bux shipped.
i could not fix the problem. All new cupseal and valve installed but somehow now it is leaking from the solenoid area. Could be the QEV since the noid still clicks but for some reson, it is not sending air to cock the gun. in fact i could not even push the bolt back due to pressure behind it. Took apart the noid and cleaned it but still had the leak which lead me to believe either the barb, QEV or somehow the LP pathway is blocked or something.
Selling a great condition black promaster complete with case, manual and small set of o-rings. As you know PM's HPR form ICD is a hit or miss and in this case a miss, so i replaced it with a CP reg. I went the cheap route so the reg is pretty bad COSMETICALLY ! a lot of tool marks and there's a chip at the lower half of the reg where the thread is. So the o-ring kinda protrudes out a bit. I put grip tape so it's not visible anymore.
Rest assured, the CP reg functions 100%.
*has duckbill ASA and macroline
* Will also throw in SP rail and on/off
* has small nicks on the right side of gun -on the VASA.
PLS NOTE: the CP reg in this picture has been sold with another marker. This is not what you are getting with the gun.
50 shipped box and everything
Last edited by bluesboyk3; 07-24-2013 at 10:37 AM.
|Thread Tools||Search this Thread|