G3 Pirahna w\ PDP board and ACE

jdubau55 · 04-12-2008, 07:25 PM

Well I haven't played in forever. This Fish has the PDP board in it. To put it simply, the board is better than the EVO board that PMI came out with a couple years after this. 5-20 BPS tunable. ACE capability. Trigger bounce adjustment, Semi, Turbo (shot on pull and release), and full auto.

Stock barrel
GenX3 reg
PMI Turbo valve
Boss Bolt
Boss hi-flow valve pin
Flushing cocking kit
IWFEU trigger....I made these for a while. The 2k2 style frame had no triggers.....so I made my own, and made some for others as well.
Other stuff I am sure.

I also have a slew of spare parts, an old double trigger non-electro frame that has a shortened trigger pull on it. Everything pretty much came from Boss Paintball Products (cept the PDP board).

PRICE: Like to get $60ish shipped. It's a super rare Fish, but then again I know what guns like these go for these days.

Trades: Nice masks, loaders, or Promaster parts.

I just want someone to love this marker and give it some playing time.

CONS: Only 1 I can think of. After years of having this, the eye that was installed has gone missing. You can get one from Digikey and resolder it to the board. Heres the link....

Digi-Key - 365-1012-ND (TT Electronics/Optek Technology - OPB710)

Just ordered 4 eye assemblies for this. So should be good to go.

jdubau55 · 04-14-2008, 07:23 AM

jdubau55 · 04-17-2008, 10:31 PM

Would really like trades for this.

jdubau55 · 04-20-2008, 09:04 PM

Would make a great beginner marker or a back up.

matteusz · 04-23-2008, 09:10 AM

jdubau55 · 04-23-2008, 06:55 PM

replied

jdubau55 · 04-26-2008, 01:49 AM

SIKE!

jdubau55 · 05-07-2008, 09:35 PM

Up....deal fell through. Pic shows all the stuff.

jdubau55 · 05-10-2008, 09:43 AM

This marker rips guys.

jdubau55 · 05-12-2008, 06:34 PM

04-12-2008, 07:25 PM	#1 (permalink)
jdubau55 Rec Poster Join Date: Mar 2008 Location: Radford, VA	G3 Pirahna w\ PDP board and ACE Well I haven't played in forever. This Fish has the PDP board in it. To put it simply, the board is better than the EVO board that PMI came out with a couple years after this. 5-20 BPS tunable. ACE capability. Trigger bounce adjustment, Semi, Turbo (shot on pull and release), and full auto. Stock barrel GenX3 reg PMI Turbo valve Boss Bolt Boss hi-flow valve pin Flushing cocking kit IWFEU trigger....I made these for a while. The 2k2 style frame had no triggers.....so I made my own, and made some for others as well. Other stuff I am sure. I also have a slew of spare parts, an old double trigger non-electro frame that has a shortened trigger pull on it. Everything pretty much came from Boss Paintball Products (cept the PDP board). PRICE: Like to get $60ish shipped. It's a super rare Fish, but then again I know what guns like these go for these days. Trades: Nice masks, loaders, or Promaster parts. I just want someone to love this marker and give it some playing time. CONS: Only 1 I can think of. After years of having this, the eye that was installed has gone missing. You can get one from Digikey and resolder it to the board. Heres the link.... Digi-Key - 365-1012-ND (TT Electronics/Optek Technology - OPB710) Just ordered 4 eye assemblies for this. So should be good to go. Last edited by jdubau55; 05-31-2008 at 07:29 PM..

04-14-2008, 07:23 AM	#2 (permalink)
jdubau55 Rec Poster Join Date: Mar 2008 Location: Radford, VA	TTT

04-23-2008, 09:10 AM	#5 (permalink)
matteusz Seasoned Member Join Date: Oct 2006	pm'd __________________ MCB Feedback Here: http://www.mcarterbrown.com/forums/s...3459#post83459 AO Feedback Here: http://www.automags.org/forums/showthread.php?t=202414 Old School Skill, New World Tech

04-26-2008, 01:49 AM	#7 (permalink)
jdubau55 Rec Poster Join Date: Mar 2008 Location: Radford, VA	SIKE! Last edited by jdubau55; 05-07-2008 at 09:35 PM..

05-12-2008, 06:34 PM	#10 (permalink)
jdubau55 Rec Poster Join Date: Mar 2008 Location: Radford, VA	TTT

04-17-2008, 10:31 PM	#3 (permalink)
jdubau55 Rec Poster Join Date: Mar 2008 Location: Radford, VA	Would really like trades for this.

04-20-2008, 09:04 PM	#4 (permalink)
jdubau55 Rec Poster Join Date: Mar 2008 Location: Radford, VA	Would make a great beginner marker or a back up.

04-23-2008, 06:55 PM	#6 (permalink)
jdubau55 Rec Poster Join Date: Mar 2008 Location: Radford, VA	replied

05-07-2008, 09:35 PM	#8 (permalink)
jdubau55 Rec Poster Join Date: Mar 2008 Location: Radford, VA	Up....deal fell through. Pic shows all the stuff.

05-10-2008, 09:43 AM	#9 (permalink)
jdubau55 Rec Poster Join Date: Mar 2008 Location: Radford, VA	This marker rips guys.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search