Free Flow E-cocker

navyseal07592 · 04-16-2008, 05:56 PM

( This is a copy of a thread that I posted before Christmas, the gun is back up for sale)

SOLD

From what I'm told it's a one-off gun made by FF, SN 131642. I don't know too much else, so if anyone has any info it would be greatly appreciated.

It is all "stock" except for a Zero-B board (all the ramping modes) and a Slik edge III bolt (super light). The other components are...
Free Flow ram and QEVs
Palmer lpr with Free Flow knob
Sidewinder hpr
System X on/off, drop
All of the other components are Free Flow: cocking rod, internals, beaver tail, ect..
It will come with a matching anodized freak back, it's hard to see in the pics, the front that you see in the last 2 pics, and the green insert (.682).

The gun is in excellent condition, the only noticeable marks are some small dings on the beaver tail and a couple of nicks about an inch back from the ram under the pump arm.
The anodizing is a very deep metallic red to dark redish-purple fade. It's very hard to get a good picture of it but it looks amazing in person.

Not looking for trades at this time.

I'd like to get $370 shipped, but I'm flexible. I use paypal or could do MO if you wanted to.

Thanks for looking

navyseal07592 · 04-17-2008, 11:49 PM

I need to sell this, feel free to offer.

paintballpaulie · 04-18-2008, 01:12 AM

is the feedneck threaded?

navyseal07592 · 04-18-2008, 03:39 AM

Quote:

Originally Posted by paintballpaulie

is the feedneck threaded?

Yes it is.

Smoothienixon · 04-18-2008, 10:19 AM

Is the Freak included?

Smoothienixon · 04-18-2008, 10:20 AM

Quote:

Originally Posted by Smoothienixon

Is the Freak included?

Disregard...missed it in the description. Too busy looking at the pics.

Abizdafuzz · 04-18-2008, 04:13 PM

Hula Popper · 04-18-2008, 10:58 PM

pmed you

navyseal07592 · 04-19-2008, 12:17 AM

Pending

Ronin · 04-19-2008, 10:16 AM

I just bought a similar FF e-cocker here in Japan. I could not be happier with it. Good luck on the sale, and to whichever lucky soul buys it... ENJOY!

04-16-2008, 05:56 PM	#1 (permalink)
navyseal07592 Active Member Join Date: Jan 2007 Location: Atlanta	Free Flow E-cocker ( This is a copy of a thread that I posted before Christmas, the gun is back up for sale) SOLD From what I'm told it's a one-off gun made by FF, SN 131642. I don't know too much else, so if anyone has any info it would be greatly appreciated. It is all "stock" except for a Zero-B board (all the ramping modes) and a Slik edge III bolt (super light). The other components are... Free Flow ram and QEVs Palmer lpr with Free Flow knob Sidewinder hpr System X on/off, drop All of the other components are Free Flow: cocking rod, internals, beaver tail, ect.. It will come with a matching anodized freak back, it's hard to see in the pics, the front that you see in the last 2 pics, and the green insert (.682). The gun is in excellent condition, the only noticeable marks are some small dings on the beaver tail and a couple of nicks about an inch back from the ram under the pump arm. The anodizing is a very deep metallic red to dark redish-purple fade. It's very hard to get a good picture of it but it looks amazing in person. Not looking for trades at this time. I'd like to get $370 shipped, but I'm flexible. I use paypal or could do MO if you wanted to. Thanks for looking __________________ <>< www.CustomCockers.com Feedback Last edited by navyseal07592; 04-20-2008 at 12:07 PM..

04-17-2008, 11:49 PM	#2 (permalink)
navyseal07592 Active Member Join Date: Jan 2007 Location: Atlanta	I need to sell this, feel free to offer. __________________ <>< www.CustomCockers.com Feedback

04-18-2008, 01:12 AM	#3 (permalink)
paintballpaulie Rec Poster Join Date: Dec 2006	feedneck? is the feedneck threaded?

04-18-2008, 10:19 AM	#5 (permalink)
Smoothienixon Newbie Join Date: Jun 2007 Location: Greer, SC	Is the Freak included? __________________ Planet Paintball http://planetpaintballinc.com

04-18-2008, 04:13 PM	#7 (permalink)
Abizdafuzz Active Member Join Date: Jul 2007 Location: OH	PM'd __________________ The Toolbelt Team Failure to Flatline, FTF Slow is Smooth, and Smooth is Fast MCB Feedback AutoMags Online Feedback

04-18-2008, 10:58 PM	#8 (permalink)
Hula Popper MCB Member Join Date: Nov 2007 Location: Ann Arbor, MI	pmed you

04-19-2008, 12:17 AM	#9 (permalink)
navyseal07592 Active Member Join Date: Jan 2007 Location: Atlanta	Pending __________________ <>< www.CustomCockers.com Feedback

04-19-2008, 10:16 AM	#10 (permalink)
Ronin Fully gruntled Join Date: Sep 2007 Location: Japan	I just bought a similar FF e-cocker here in Japan. I could not be happier with it. Good luck on the sale, and to whichever lucky soul buys it... ENJOY! __________________ My oh my. Strategy game, anyone? My feedback May I ask you to donate to help my brother Adam?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search