F/S/T Shocktech bodied ION

Chaos · 06-24-2008, 11:52 PM

Up for sale is my recently reaquired and heavily upgraded Smart Parts Ion.
Some of you have seen this gun before and while I hate to part with it,I'm not going to be using it anymore as I'm getting back to mechanical guns only for a while.
My goal when setting this up was to make the gun as easy to use and adjust as possible as well as to be a durable and easy to service.I replaced the Plastic banjo fittings with Stainless ones,installed a Black Heart board (only board with a speaker,makes adjusting the settings a breeze),LED eyes so you can see that the eyes are on and working,put on a Shocktech body which was one of the first bolt out the back bodies available,put on an AKA 2 liter (the fastest recharge rate and the highest efficiency reg I've ever seen) and installed an L7 bolt kit which makes the bolt as small as possible (Only 3 orings that wear)

Here's the all the specs

Silver Shocktech Body w/ bolt out the back cap and matching clamping feedneck
TechT Paintball L7 Bolt kit
Virtue blue LED Eye board
SP Blackheart board (I have the eye board that came with this,just never used it)
Freak barrel with 16" tip in dust silver (Does Not Come With Inserts)
New Designz Firing Can,Delrin spring loaded detents (2 extra sets included) and breech
SP Mini drop with on/off
New Designz Wave Trigger
Critical trigger pin (Makes for easy trigger removal)
AKA 2 Liter Reg
New Designz Single snatch grip
MW Paintball grip hump (I'll keep this if it's not wanted and I know you don't all like them)
Stainless Banjo fittings and SP S/S QEV
Dynasty .45 grips

SOLD!

Chaos · 06-25-2008, 08:49 PM

Price dropped a bit and pic updated

06-24-2008, 11:52 PM	#1 (permalink)
Chaos Spread The Virus Join Date: Mar 2006 Location: Hudson,MA Posts: 3,012	F/S/T Shocktech bodied ION Up for sale is my recently reaquired and heavily upgraded Smart Parts Ion. Some of you have seen this gun before and while I hate to part with it,I'm not going to be using it anymore as I'm getting back to mechanical guns only for a while. My goal when setting this up was to make the gun as easy to use and adjust as possible as well as to be a durable and easy to service.I replaced the Plastic banjo fittings with Stainless ones,installed a Black Heart board (only board with a speaker,makes adjusting the settings a breeze),LED eyes so you can see that the eyes are on and working,put on a Shocktech body which was one of the first bolt out the back bodies available,put on an AKA 2 liter (the fastest recharge rate and the highest efficiency reg I've ever seen) and installed an L7 bolt kit which makes the bolt as small as possible (Only 3 orings that wear) Here's the all the specs Silver Shocktech Body w/ bolt out the back cap and matching clamping feedneck TechT Paintball L7 Bolt kit Virtue blue LED Eye board SP Blackheart board (I have the eye board that came with this,just never used it) Freak barrel with 16" tip in dust silver (Does Not Come With Inserts) New Designz Firing Can,Delrin spring loaded detents (2 extra sets included) and breech SP Mini drop with on/off New Designz Wave Trigger Critical trigger pin (Makes for easy trigger removal) AKA 2 Liter Reg New Designz Single snatch grip MW Paintball grip hump (I'll keep this if it's not wanted and I know you don't all like them) Stainless Banjo fittings and SP S/S QEV Dynasty .45 grips SOLD! __________________ Chaos PoG Member # 1018 LPPC Member #71 NO'MAAM #5 My Gallery My Feedback FORUM RULES AND FAQ'S Last edited by Chaos; 06-25-2008 at 10:39 PM. Reason: Sold

06-25-2008, 08:49 PM	#2 (permalink)
Chaos Spread The Virus Join Date: Mar 2006 Location: Hudson,MA Posts: 3,012	Price dropped a bit and pic updated __________________ Chaos PoG Member # 1018 LPPC Member #71 NO'MAAM #5 My Gallery My Feedback FORUM RULES AND FAQ'S

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search