Bushymidator for sale - cheap

bluesboyk3 · 01-14-2009, 07:40 PM

buyer backed out so have to list it again

2. ICD Bushmaster 2000 - one of a kind
Featured in the "voided warranty" section of DIY's
Do You want to Put A New Frame (UL?) on Your marker? Look HERE! - PbNation
look at the timmy, 90 frame, bushmaster or look in sig
***It is a home job. I do not have extra money to get the frame/ body milled and annoed.
*** The gun works 100%.
UPS:
***** cocker to bushy barrel adapter - u can put cocker barrel into this bushy.
** GBR RAM- no longer made - claimed to vent air when it's about to chop a paintball so it'd stop on it instead of chopping it - never tested on paint but i did stuck my finger in there and it's not quite as painful as my promaster. Dunno if paintball will stand the pressure. Never tested on paint. Shoots great with reballs. GBR RAM cost about 100 bux when it first came out
** OTB frame: discontinued - feels nice. Cost 125 bux when it first came out.
** TIMMY FRENZY Board - i dunno what series but it is set on 15 bps ramp. - promaster board will work with noid.
** KAPP vert reg adapter
** CP REG - tool marks from prev owner but works fine
** Timmy noid
** Timmy LCD screen
** Dye boomstick barrel 14"
** ICD shorty barrel
** Kapp delrin ball detent.
** BOB LONG XPRESS ASA

** Blind bolt body mated with stock bolt. Promaster bolt works well too.
** 1 Hose is routed outside the body so it won't kink under storage.
**** Tool marks around the right side trigger frame because the activation screw is too deep and OTB has a very small allen screw, I had to dremmel the screw out and accidentally scratch the frame. cosmetics only.
I have put in a lot of money over the years for this gun. Works great, never fails me. But I just want to move on to try out different things. Cousins, friends who tried this gun on the field say it's very accurate and smooth.
NOTE: you can get timmy membrane button to adjust the board or leave it as it is. Or get a promaster board. I'd advise you to leave it the way it is.
***** GBR ram is brand new so there's stiction sometimes (FSDO) but it will get better with time.
pics:

you can see the hose, on/off button and LED on the bottom of the grip

scratch from tool

Price - Looking for $150 shipped OBO.

HurtCow · 01-14-2009, 07:47 PM

Ghetto-tastic! I love it! Looking for any trades?

bluesboyk3 · 01-15-2009, 12:17 AM

lol, thanks. Well, trying to thin out inventory right now but what do u have ?

01-14-2009, 07:40 PM	#1 (permalink)
bluesboyk3 Active Member Join Date: Dec 2008	Bushymidator for sale - cheap buyer backed out so have to list it again 2. ICD Bushmaster 2000 - one of a kind Featured in the "voided warranty" section of DIY's Do You want to Put A New Frame (UL?) on Your marker? Look HERE! - PbNation look at the timmy, 90 frame, bushmaster or look in sig *It is a home job. I do not have extra money to get the frame/ body milled and annoed. * The gun works 100%. UPS: *** cocker to bushy barrel adapter - u can put cocker barrel into this bushy. GBR RAM- no longer made - claimed to vent air when it's about to chop a paintball so it'd stop on it instead of chopping it - never tested on paint but i did stuck my finger in there and it's not quite as painful as my promaster. Dunno if paintball will stand the pressure. Never tested on paint. Shoots great with reballs. GBR RAM cost about 100 bux when it first came out OTB frame: discontinued - feels nice. Cost 125 bux when it first came out. TIMMY FRENZY Board - i dunno what series but it is set on 15 bps ramp. - promaster board will work with noid. KAPP vert reg adapter CP REG - tool marks from prev owner but works fine Timmy noid Timmy LCD screen Dye boomstick barrel 14" ICD shorty barrel Kapp delrin ball detent. BOB LONG XPRESS ASA Blind bolt body mated with stock bolt. Promaster bolt works well too. 1 Hose is routed outside the body so it won't kink under storage. ** Tool marks around the right side trigger frame because the activation screw is too deep and OTB has a very small allen screw, I had to dremmel the screw out and accidentally scratch the frame. cosmetics only. I have put in a lot of money over the years for this gun. Works great, never fails me. But I just want to move on to try out different things. Cousins, friends who tried this gun on the field say it's very accurate and smooth. NOTE: you can get timmy membrane button to adjust the board or leave it as it is. Or get a promaster board. I'd advise you to leave it the way it is. *** GBR ram is brand new so there's stiction sometimes (FSDO) but it will get better with time. pics: you can see the hose, on/off button and LED on the bottom of the grip scratch from tool Price - Looking for $150 shipped OBO.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-15-2009, 12:17 AM	#3 (permalink)
bluesboyk3 Active Member Join Date: Dec 2008	lol, thanks. Well, trying to thin out inventory right now but what do u have ?