2 insanely custom Rainmakers!

Aluminum Gerbil · 07-02-2009, 02:20 AM

I've got 2 of the most modified rainmakers you'll ever see up for sale right now. Both are creations of Rainman229 and are testaments to his skill as a fabricator.

The first is the Ultralite 2. This is one of the lightest rainmakers you'll ever hold. It has an ANS reg, 15 degree cocker asa, maybe a KAPP LP reg, can't tell. Mad Marty Mods, NO backblock for extra shortness, TLALOC board trimmed to fit a 9v in the grip with the board, adjustable feedneck, custom mac mount, 90 degree angel frame, delrin bolt, prolly more I just don't remember. I've NEVER shot this although claudio tested it before sending it to me so I assume it works. Only thing I did was trim down the board which I've done with success in the past so I'm guessing it would be fine. If not a very easy fix indeed.

The second is a marker of my design, the BFG. It's got a Kapp(I think, it's HUGE) drop, Palmer Stab, Cocker ASA, custom block for switch mount below grip, Custom mac mount, SS fittings, red LP hose, Kapp LP reg(I think?), custom milling, angel feedneck, cocker detent, Thunderboard LCD w/ eyes(Says "Ph33r the R4IN" on boot), Titanium link pin, Mad Marty Mods, Madmann valve, adjustable valve spring, Custom backblock that contains a 9v batter for an ultra clean look. I believe those are all the upgrades. As you can tell it was quite the project. It shot beautifully at one time, but now there are a couple issues. The feedneck needs glued back in(EASY fix, common issue), it needs a new eye the one in it broke, and a bolt( I seem to have lost the one I had in it. I will do some digging, but can make no promises. I had a red acrylic bolt custom made for it at one time)

100_0677.JPG

100_0678.JPG

Would like $300 for the Ultralite 2, $350 for the BFG. Feel free to make me an offer, I'm pretty out of touch when it comes to paintball. Not interested in many trades I've got a PIMP I'm holding on to in case I ever do go out and play could use an impulse freak back, May consider trades for a phantom with regular and SC bodies. Other than that, I'm getting out of the sport.... Sorry.

Gerbil

Aluminum Gerbil · 07-02-2009, 02:21 AM

100_0682.jpg

100_0681.jpg

blackrain · 07-02-2009, 02:37 AM

Didn't that splash one belong to Dave Brisco? How did you get that? That's just as rare as the Doc Rainmaker Walker owns. Dave's marker set the standard for the Rainmaker customizing.
Later,
Blackrain

Aluminum Gerbil · 07-02-2009, 08:52 AM

I got it from Nate Greenman(or green something...) Who bought it from Dave Brisco because he worked for Brass Eagle and was using it so much for publicity photos. When I bought it I got a HUGE package from Brisco that included magazines, a matching anno'd bolt, publicity photos, and other misc stuff.

John Satclaire · 07-02-2009, 12:05 PM

PM sent re: Ultralite 2

ScottQ · 07-02-2009, 12:46 PM

Sell me the bisco RM.

HurtCow · 07-02-2009, 02:44 PM

Scott! I got your Goose Honker.

Be4life182 · 07-02-2009, 02:54 PM

its like a BEOG reunion in this place.

melkson · 07-02-2009, 04:00 PM

no joke

Bojangles1983 · 07-02-2009, 06:18 PM

Its like the Frankenstein's monster of paintball!

07-02-2009, 02:20 AM	#1 (permalink)
Aluminum Gerbil Rec Poster Join Date: Jun 2009	2 insanely custom Rainmakers! I've got 2 of the most modified rainmakers you'll ever see up for sale right now. Both are creations of Rainman229 and are testaments to his skill as a fabricator. The first is the Ultralite 2. This is one of the lightest rainmakers you'll ever hold. It has an ANS reg, 15 degree cocker asa, maybe a KAPP LP reg, can't tell. Mad Marty Mods, NO backblock for extra shortness, TLALOC board trimmed to fit a 9v in the grip with the board, adjustable feedneck, custom mac mount, 90 degree angel frame, delrin bolt, prolly more I just don't remember. I've NEVER shot this although claudio tested it before sending it to me so I assume it works. Only thing I did was trim down the board which I've done with success in the past so I'm guessing it would be fine. If not a very easy fix indeed. The second is a marker of my design, the BFG. It's got a Kapp(I think, it's HUGE) drop, Palmer Stab, Cocker ASA, custom block for switch mount below grip, Custom mac mount, SS fittings, red LP hose, Kapp LP reg(I think?), custom milling, angel feedneck, cocker detent, Thunderboard LCD w/ eyes(Says "Ph33r the R4IN" on boot), Titanium link pin, Mad Marty Mods, Madmann valve, adjustable valve spring, Custom backblock that contains a 9v batter for an ultra clean look. I believe those are all the upgrades. As you can tell it was quite the project. It shot beautifully at one time, but now there are a couple issues. The feedneck needs glued back in(EASY fix, common issue), it needs a new eye the one in it broke, and a bolt( I seem to have lost the one I had in it. I will do some digging, but can make no promises. I had a red acrylic bolt custom made for it at one time) 100_0677.JPG 100_0678.JPG Would like $300 for the Ultralite 2, $350 for the BFG. Feel free to make me an offer, I'm pretty out of touch when it comes to paintball. Not interested in many trades I've got a PIMP I'm holding on to in case I ever do go out and play could use an impulse freak back, May consider trades for a phantom with regular and SC bodies. Other than that, I'm getting out of the sport.... Sorry. Gerbil

07-02-2009, 02:37 AM	#3 (permalink)
blackrain MCB Member Join Date: Apr 2006 Location: America	Didn't that splash one belong to Dave Brisco? How did you get that? That's just as rare as the Doc Rainmaker Walker owns. Dave's marker set the standard for the Rainmaker customizing. Later, Blackrain __________________ Visit my Sponsor page: http://www.mcarterbrown.com/forums/t...y-sponsor.html "When all else fails, pull the pin and see what happens next" Follow Team Blackrain on Face Book: http://www.facebook.com/#!/profile.p...00000734844527 Best Auto cocker info ever Just like to make crazy stuff for paintball? Click here My feedback How Paintballs are made

07-02-2009, 02:54 PM	#8 (permalink)
Be4life182 Post Whore Join Date: Jul 2006 Location: Maine	its like a BEOG reunion in this place. __________________ [Pumpster] 12:58 am: yeah, we have $1.2 per L cdn [Be4life182] 12:59 am: Thats the price you pay for having ure own name for ham http://www.mcarterbrown.com/forums/f...-feedback.html

07-02-2009, 06:18 PM	#10 (permalink)
Bojangles1983 Active Member Join Date: Dec 2008 Location: Indiana	Its like the Frankenstein's monster of paintball! __________________ PM me for "Remove Before Flight" key tags! Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-02-2009, 02:21 AM	#2 (permalink)
Aluminum Gerbil Rec Poster Join Date: Jun 2009	100_0682.jpg 100_0681.jpg

07-02-2009, 08:52 AM	#4 (permalink)
Aluminum Gerbil Rec Poster Join Date: Jun 2009	I got it from Nate Greenman(or green something...) Who bought it from Dave Brisco because he worked for Brass Eagle and was using it so much for publicity photos. When I bought it I got a HUGE package from Brisco that included magazines, a matching anno'd bolt, publicity photos, and other misc stuff.

07-02-2009, 12:05 PM	#5 (permalink)
John Satclaire Post Whore Join Date: Feb 2008	PM sent re: Ultralite 2

07-02-2009, 12:46 PM	#6 (permalink)
ScottQ Newbie Join Date: Mar 2008	Sell me the bisco RM.