TM7 wont fire....

M600 · 10-21-2011, 04:58 AM

ok so i got a tm7 that didn't work, the bellend that owned it before failed at soldering and stripped one of the battery wires
now everything turns on, i can cycle through firing modes, eyes work but the marker wont shoot
i tried turning eyes off, ive loaded paintballs into the breech, but when i pull the trigger nothing happens...
im guessing it might be a solenoid problem
any help appreciated
cheers

nhmercracer · 10-21-2011, 09:15 PM

Can you hear the solenoid click?

M600 · 10-23-2011, 01:25 PM

nope....

Stripes · 10-23-2011, 01:32 PM

are you sure the microswitch is good?

grimace · 10-23-2011, 02:45 PM

Quote:

Originally Posted by Stripes

are you sure the microswitch is good?

There's no microswitch, the trigger is magnetic.

Is the trigger magnet there and adjusted properly?

edge814 · 10-23-2011, 02:59 PM

What you can do if you are not hearing the solenoid is to reset it. There is an entire thread on doing this on the mini which is the same thing. Here is the thread on pbn hope it helps.

*The Ultimate How To Fix Your Mini Thread*

M600 · 10-23-2011, 04:18 PM

hmm ill try the solenoid again, how do i know if the shot is registered?

M600 · 10-23-2011, 04:42 PM

ok the shot is not registering as in programming mode pulling the trigger does nothing, ive tried adjusting the trigger with no luck
how should it be normally?
cheers

M600 · 10-23-2011, 04:54 PM

looks like IC3 (the hall sensor im guessing) is missing from the board ¬¬
where can i get a new one? :'(

10-21-2011, 04:58 AM	#1 (permalink)
M600 I want more guns! Join Date: Sep 2008 Location: London/Nottingham UK	TM7 wont fire.... ok so i got a tm7 that didn't work, the bellend that owned it before failed at soldering and stripped one of the battery wires now everything turns on, i can cycle through firing modes, eyes work but the marker wont shoot i tried turning eyes off, ive loaded paintballs into the breech, but when i pull the trigger nothing happens... im guessing it might be a solenoid problem any help appreciated cheers __________________ My feedback: http://www.mcarterbrown.com/forums/f...ml#post1349025

10-23-2011, 01:25 PM	#3 (permalink)
M600 I want more guns! Join Date: Sep 2008 Location: London/Nottingham UK	nope.... __________________ My feedback: http://www.mcarterbrown.com/forums/f...ml#post1349025

10-23-2011, 04:18 PM	#7 (permalink)
M600 I want more guns! Join Date: Sep 2008 Location: London/Nottingham UK	hmm ill try the solenoid again, how do i know if the shot is registered? __________________ My feedback: http://www.mcarterbrown.com/forums/f...ml#post1349025 Last edited by M600; 10-23-2011 at 04:41 PM.

10-23-2011, 04:42 PM	#8 (permalink)
M600 I want more guns! Join Date: Sep 2008 Location: London/Nottingham UK	ok the shot is not registering as in programming mode pulling the trigger does nothing, ive tried adjusting the trigger with no luck how should it be normally? cheers __________________ My feedback: http://www.mcarterbrown.com/forums/f...ml#post1349025

10-23-2011, 04:54 PM	#9 (permalink)
M600 I want more guns! Join Date: Sep 2008 Location: London/Nottingham UK	looks like IC3 (the hall sensor im guessing) is missing from the board ¬¬ where can i get a new one? :'( __________________ My feedback: http://www.mcarterbrown.com/forums/f...ml#post1349025

10-23-2011, 02:59 PM	#6 (permalink)
edge814 Active Member Join Date: Jan 2011	What you can do if you are not hearing the solenoid is to reset it. There is an entire thread on doing this on the mini which is the same thing. Here is the thread on pbn hope it helps. The Ultimate How To Fix Your Mini Thread

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search