mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Empire (http://www.mcarterbrown.com/forums/empire/)
-   -   Empire Trracer Stock and 10 rnd feed! (http://www.mcarterbrown.com/forums/empire/193794-empire-trracer-stock-10-rnd-feed.html)

paintman161 02-28-2012 11:25 AM

Empire Trracer Stock and 10 rnd feed!
 
SO i recently got my friend a Empire Trracer (I already own one). But since he has like no cash, i decided to come up with a cheap way to make a stock and 10 rnd feed for him.

This is what i came up with!
FIrst i made him a 10 rnd feed cram and jam, used 3/4" copper elbow and 3/4" tube, i then used a 15mm socket to stretch out the tube to fit the 10 round tubes into (Friction fit) Work really well, even had a slight angle so the balls roll down to the feed port! Painted it black and here what it looks like:
http://i569.photobucket.com/albums/s...1/IMG_1287.jpg

Then i needed to make some sort of stock for when he is using 12 gram bucket changer, so i have some 1/2" x 24" Aluminum rod. Went to hacksawing and dremeling away. This is what I was able to make:
http://i569.photobucket.com/albums/s...1/IMG_1286.jpg

This is actually my Trracer (dont have his yet!) and an overall picture!
http://i569.photobucket.com/albums/s...1/IMG_1289.jpg

suaze 02-28-2012 11:30 AM

Nice work. At first glance, I thought it was a CCI T-stock.

Redivulpis 02-28-2012 11:35 AM

Great work on both parts. I'm with Suaze, that stock looks very well done.

paintman161 02-28-2012 11:35 AM

Thanks! The best part is the stock cost like 5 bucks!


All times are GMT -4. The time now is 08:07 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC