Paintball

[AwwShoot]

Yeah, not going to buy a Hammer. Last thing I need to deal with is yet another barrel threading. They should all just move to Autococker threads.

[RAZRBAKK]

Give it a couple months, and the Hammer 7 will have a new breech that is 'cocker threaded.

[capitalpaintball]

But you will need to sand the pump handle down, because no cocker threaded barrels will fit if you don't.

[desertT1]

Is there really a need to replace the stock Hammer7 barrel? It's just the right size for FS rounds and can take all sorts of tips.

[lmartin]

Originally Posted by Rothmog

I prefer the trracer since it is cocker threaded and I am used to the feel of it already.

if you prefer the cocker threading, it would be cheaper to buy the Hammer and rethread the breech sleeve to cocker threading. I can't remember the persons name on MCB but he said he could do it. seems like less work to me.

[desertT1]

Originally Posted by lmartin

if you prefer the cocker threading, it would be cheaper to buy the Hammer and rethread the breech sleeve to cocker threading. I can't remember the persons name on MCB but he said he could do it. seems like less work to me.

Alpha434 is who said he would do it.

[240SX]

Hey if the stock barrel will work just as good as another then I'm staying stock.

[lmartin]

the stock barrel is good seems to be fine for FS, if you need it for paintballs then you may end up needing freak inserts. Paint now a days is all over the place. I thought about rethreading my breach to use a freak barrel but then decided to get the stock barrel freaked. solves my issues and is the cheapest route i can think of.

[240SX]

I'm thinking this marker will serve as first strike only for me, but the freak boring the stock barrel is a good idea.

[capitalpaintball]

the stock barrel looks great, but I saw a marked improvement changing to a custom barrel. With the detents in the breach there is no real need for freak sleeves and i dislike shooting a ball into a sleeve.