mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Empire (http://www.mcarterbrown.com/forums/empire/)
-   -   Trracer under cocking ideas (http://www.mcarterbrown.com/forums/empire/233940-trracer-under-cocking-ideas.html)

Thegtwyo86 05-21-2013 04:35 AM

Trracer under cocking ideas
 
Like the title. has anyone under cocked a trracer or does anyone have any ideas on how to do it. Also was i wondering if anyone has mounted a phantom vertical Asa adapter on a trracer so I can mount a cp mini reg on it?
Thanks James

Thegtwyo86 05-22-2013 08:46 AM

Bump!! Anyone?

suaze 05-22-2013 09:03 AM

For under-cocking, you'd basically follow the design of a CCI Phantom.

For the vertical ASA, I see no reason why you cannot drill the holes to mount to the trigger guard. You can strengthen the connection with epoxy.

Thegtwyo86 05-22-2013 09:13 AM

Do you think the plastic trigger guard would be able to hold up with the stress of the regulator hanging off of it?

capitalpaintball 05-22-2013 10:34 AM

Smart Parts Boss did it. just need to add a guide rod to your frames. maybe something held in by the front screw.

VintageRex.com | Smart Parts

Thegtwyo86 05-22-2013 01:56 PM

Quote:

Originally Posted by capitalpaintball (Post 2714740)
Smart Parts Boss did it. just need to add a guide rod to your frames. maybe something held in by the front screw.

VintageRex.com | Smart Parts

That looks like it might work. What would you use for a pump kit? Or would you buil your own?

capitalpaintball 05-22-2013 07:42 PM

CCM EZ Grips are nice. they have a groove for the barrel and are meaty enough to work with. if you a way below the barrel regular round CCM handles are easy to find.
heres a 98 I under cocked.
http://www.mcarterbrown.com/forums/a...m-img_0325.jpg

Thegtwyo86 05-22-2013 07:54 PM

Quote:

Originally Posted by capitalpaintball (Post 2715170)
CCM EZ Grips are nice. they have a groove for the barrel and are meaty enough to work with. if you a way below the barrel regular round CCM handles are easy to find.
heres a 98 I under cocked.
http://www.mcarterbrown.com/forums/a...m-img_0325.jpg

Sweet!! What did you use as a guide rod? Also are the EZ grips drilled and taped for a duel pump rod?

Chappy 05-22-2013 08:13 PM

Buy a tagmaster, its an undercocking trracer. As for a vert ASA, it can work, but will eventually crack the plastic trigger guard. You could put the reg out the backbottle then bottomline it.

capitalpaintball 05-22-2013 09:37 PM

vert hanger was an old on/off asa cut at an angle. some funky work to get the front screw to go through and not leak.
but its solid enough to hold a tank. steal line is from Phantom.

http://i164.photobucket.com/albums/u...l/IMG_0543.jpg

EZ grips are not tapped for rods, the plate is, and only on one side. if you use just the delrin handle you will need to make your own holes.

the rod on the 98 was some round aluminum stock I found at the hardware store.


All times are GMT -4. The time now is 02:21 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC