|First Strike Everything first strike related|
| ||Thread Tools||Search this Thread|
|08-14-2013, 02:27 AM||#11 (permalink)|
Join Date: Dec 2009
would adding a taper/cone shape to the face of the bolt help align the round? maybe epoxy a bit from a abs hose coupler thingy to the tip. i saw an ats done that way here on mcb, the G3 modded one.
|08-14-2013, 11:44 PM||#12 (permalink)|
My plan was to do something along those lines. Buy a spare bolt and taper the tip. I'm hoping, like the differences in bolt between the T9.0 and T9.1, that will help it with FSR.
Tiberius bolt differences.
|08-15-2013, 05:39 PM||#13 (permalink)|
Has too much crap
Join Date: Apr 2012
I may have an idea of what is going on. I have some older 10 round mags, and some newer ones. One thing I noticed in the older ones, is that the detent at the top is very small. When you fill a mag with paint and shake it a bit, it starts to fall out because the detent is to small. In the newer mags, the detent is larger, so paint does not fall out. Both of the first strike magazines I own have the larger detent, so it is possible the detent in the mag is catching the round as it goes in to the marker, and flipping it around.
|Thread Tools||Search this Thread|