Amazingly Tiny: Guerrilla Airâ„¢ Mythâ„¢ HIGH PRESSURE Regulator

podup365.com · 01-25-2007, 06:39 AM

As soon as you can, you should check out Guerilla Air's new "Myth" regulator.

I held one of the prototypes today and got a look at it attached to a tank an screwed into a marker. Didn't get to test it out, although I am looking forward to seeing how one of these performs during a game.

Yep, that's the whole thing, hiding behind the gauge!

It is so small and lightweight that there is almost nothing to it! I think they could have made it smaller, but then there wouldn't have been room for the fill nipple and gauge to screw in.

Attached to one of the 13 ci or 22 ci tanks from Wevo would really make for a small air system on a pump marker.

G - Guerrilla Air™ Myth™ HIGH PRESSURE Regulator

Crash · 01-25-2007, 07:18 AM

All I can say is......

that is small! Do you know if they come in HP and LP versions? Have to check them out!

Raynman · 01-25-2007, 09:15 AM

Wow, I can see myself rocking a 13ci in my vertical adapter all of the sudden.

Mirage · 01-25-2007, 09:16 AM

Oooh small!

Nice, though.

Meph · 01-25-2007, 11:05 AM

Screw in tanks will never be smaller than bolt ons.

Air America Apok2K FTW!

Schmitti · 01-25-2007, 11:19 AM

Actually... the screw-in tank system is dimensionally smaller than a bolt on system.

The fact that the screw-in is not stand alone and requires an asa is what makes it larger than a bolt on.

Azzy · 01-25-2007, 11:57 AM

Those look like they are non-removeable. IIRC, the reg is actually inside the tank. Can the reg be placed on a different tank, such as the 22ci?

Shiba-Kun · 01-25-2007, 12:30 PM

Are they for sale yet? I know they've been advertising them on their site since at least late last year.

Hopefully there'll be some good deals on Ambush, FUKU, etc. regs from people who decide to move up.

B · 01-25-2007, 02:20 PM

Semember the reg guts are now inside the tank so you now loose some CI.

podup365.com · 01-25-2007, 02:38 PM

If I understand correctly it would be removable from a tank or purchased on it it's own and installed on your own tank (properly and by a certified air smith, of course!)

Quote:

Originally Posted by B

Remember the reg guts are now inside the tank so you now loose some CI.

I reason that the gains in efficiency would overcome the loss in CI. The part that screws into the tank is just as small, probably about 1.25 inches and less diameter than a dime. I wish I had taken a picture of it outside of a tank while it was here.

01-25-2007, 06:39 AM	#1 (permalink)
podup365.com Active Member Join Date: Jul 2006 Location: Collinsville, Illinois	Amazingly Tiny: Guerrilla Air™ Myth™ HIGH PRESSURE Regulator As soon as you can, you should check out Guerilla Air's new "Myth" regulator. I held one of the prototypes today and got a look at it attached to a tank an screwed into a marker. Didn't get to test it out, although I am looking forward to seeing how one of these performs during a game. Yep, that's the whole thing, hiding behind the gauge! It is so small and lightweight that there is almost nothing to it! I think they could have made it smaller, but then there wouldn't have been room for the fill nipple and gauge to screw in. Attached to one of the 13 ci or 22 ci tanks from Wevo would really make for a small air system on a pump marker. G - Guerrilla Air™ Myth™ HIGH PRESSURE Regulator __________________ Illinois Oldschool - Gene J. - Collinsville, Illinois Find me at: Xtreme Paintball Park See my paintball photos at:

01-25-2007, 07:18 AM	#2 (permalink)
Crash Post Whore Join Date: Mar 2006 Location: North East Texas	All I can say is...... that is small! Do you know if they come in HP and LP versions? Have to check them out! __________________ Later, John My FS Listing Misc bits- My feed back: http://www.mcarterbrown.com/forums/s...ead.php?t=1021 Carter's Commando Texas Division: http://www.mcarterbrown.com/forums/c...-division.html

01-25-2007, 09:16 AM	#4 (permalink)
Mirage Karma Enforcement Agency Join Date: Dec 2006 Location: Waiting for the rainbows end...	Oooh small! Nice, though. __________________ Snow called water going violent Damn the end of the stream Too much cold in one place breaks That's why you might know what I mean Consider how small you are Compared to your scream The human dream Doesn't mean **** to a tree Feed Back\|\| Rogue Cell #1

01-25-2007, 11:57 AM	#7 (permalink)
Azzy Passing through rider Join Date: Mar 2006 Location: Finleyville, PA	Those look like they are non-removeable. IIRC, the reg is actually inside the tank. Can the reg be placed on a different tank, such as the 22ci? __________________ Bryan "Azzy" Spiegel Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6 "It is my right to be uncommonâ€”if I can. I seek opportunityâ€”not security. I do not wish to be a kept citizen, humbled and dulled by having the state look after me.... â€ - Dean Alfange

01-25-2007, 09:15 AM	#3 (permalink)
Raynman MCB Member Join Date: Apr 2006 Location: Durham, NC	Wow, I can see myself rocking a 13ci in my vertical adapter all of the sudden.

01-25-2007, 11:05 AM	#5 (permalink)
Meph Trololol Join Date: Apr 2006 Location: New York	Screw in tanks will never be smaller than bolt ons. Air America Apok2K FTW!

01-25-2007, 11:19 AM	#6 (permalink)
Schmitti Red=Moderator Join Date: Apr 2006 Location: Schen. NY	Actually... the screw-in tank system is dimensionally smaller than a bolt on system. The fact that the screw-in is not stand alone and requires an asa is what makes it larger than a bolt on.

01-25-2007, 12:30 PM	#8 (permalink)
Shiba-Kun Post Whore Join Date: Sep 2006	Are they for sale yet? I know they've been advertising them on their site since at least late last year. Hopefully there'll be some good deals on Ambush, FUKU, etc. regs from people who decide to move up.