Buy, Sell, Trade

[Stripes]

FINAL DATE FOR PAYMENT SATURDAY, OCT 30


well... it took forever, but I finally have everything set up

12 round 1-piece feed. It secures to the standard SC body as well as the valve.
All screws will be included. Takes standard CCI feedcaps. The feed is raised from the body so using a drop-out valve will be far easier.

it will be drilled at 2.5" intervals for attachment of a site rail, adapters are going to be priced separately under-cost at $10/pair, they will all be anodized black


here is what it will look like

there will only be 3 rail holes in the final, this was just a convenient pic I already had uploaded

and the adapter




pricing is as follows (I know it's kind of weird, but I'm barely making anything)
$53 Raw
$57 dust black or clear
$60 polished black or clear

shipping will be $5 domestic, $10 international
also, please specify if you want the adapters, I'll only be ordering a few extra
post here then PM me, once I get 25-30 preorders, I'll put in the order with the machining company and we'll be good to go

[Stripes]

once I get 20 or so preorders, I'll need $40 for each feed for machining, then the rest once they're done for ano and shipping

1. twist -dust black and raw PENDING
2. AlexH -Dust black + adapter PAID
3. fatfaka808 -polished black
4. clayalc -raw PAID
5. splattttttt -dust black PAID
6. surf2live -dust black PAID
7. Dannyboy -polished clear
8. TCPaintball -polished black + adapter PAID
9. Ghost334 -polished black
10. ComradeBenedict -polished clear PAID
11. warbeast - black polished + adaptors PAID
12. scphantom9195 -polished black + adapter PENDING
13. bluefish -raw PENDING
14. Chaos -black polished PAID
15. Jkoselka- black polished - PAID
16. PK5 - gloss black PAID
17. mailmanmike - dust black PAID
18. Horizon - gloss black PAID
19. goober - dust black
20. dundadun - polished raw PAID
21. Super Staunchy - polished black PAID
22. volunteer paintball - polished black PAID
23. Redbeard the Pirate - Polished black PAID
24. Have Blue - polished black PENDING
25.

[twist]

Put me up for one of these bad boys, dust black please !
Thanks for the updates Stripes ! I'll be sending you a pm with details later today.

It might be written down somewhere, but what material would you plan using ?

[Stripes]

6061 al

[AlexH]

ill take one in dust black with a sight rail.

[Stripes]

Originally Posted by AlexH

ill take one in dust black with a sight rail.

it doesn't come with a rail, it has adapters
you should only have to drill a single hole in your rail, though
most people can handle a drill well enough to make it through thin Al

[clayalc]

PM'd

[clayalc]

I will take one raw feed. What is the adapter for? LMK. Thanks.

Clay

[Stripes]

Originally Posted by clayalc

I will take one raw feed. What is the adapter for? LMK. Thanks.

Clay

the adapter is so that you can use a tac rail of your choice on top of the gun

you realize that raw means the machine lines will still be in it, right?

[splattttttt]

Originally Posted by Stripes

Space reserved for preorder list
(Mods, I know 1 bump per day, but it was still at the top when I posted this reply)

1. twist
2. AlexH -Dust black + adapter
3. fatfaka808 -polished black
4. clayalc -raw
5.splattttttt Dust Black
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.

Hows that?
Thanks.