mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 04-02-2011, 06:13 PM   #1 (permalink)
older, working on wiser
 
zacgodwin's Avatar
 
Join Date: Mar 2011
Location: Evansville IN

working on bko need help please

my buddy just got a bko on ebay. It came with an inline max flo by smart parts. The tank was out of hydro. SO i took my in line max flo off of a shocker sport and hooked it up. when i fire it without air i can hear the solenoid click and the led blink. when air is ran through it it dribbles out the barrel landing like 4-5 feet away. adjusting the reg it would then not even move the bolt. i have never owned one of these and neither has he. the guy he got it from said it fired fine with no leaks before he bid on it. i sent the emails myself. please help.

thanks
zacgodwin is offline   Reply With Quote
Old 04-02-2011, 09:24 PM   #2 (permalink)
ScatterBrained
 
hellbatman's Avatar
 
Join Date: Apr 2007
Location: SoCal

Does the valve seal when the marker airs up? Are you sure you are putting the pin into the slot on the ram? Do you feel any resistance in the ram, besides the spring?
Likely the ram is just gunked up.

Did you guys mess with the LPR at all? When changing tanks/regs I usually back the LPR and HPR out...then bump the HPR to the appropriate pressure followed by the LPR.

-curtis
__________________
Charlie Fox Crew Paintballer
Customer of Flo's Flowers and Paintball
Pico Rivera, California
MCB Feedback
hellbatman is offline   Reply With Quote
Old 04-03-2011, 01:42 AM   #3 (permalink)
older, working on wiser
 
zacgodwin's Avatar
 
Join Date: Mar 2011
Location: Evansville IN

ok totally new to this gun. when i unscrew the back end under the bolt i csn see a pc. of brass> that is spring loaded. i took off the front that has to be the velocity. where exactly is the ram? if i pull the bolt i can see clear through the barrel so it must be under the bolt. can you please tell me how to remove the ram.so i can clean any gunk out. i spent alot of time thumbing through 10 yr old pages and now just need someone who knows whats up. thank you so much
zacgodwin is offline   Reply With Quote
Old 04-03-2011, 10:04 PM   #4 (permalink)
MCB Member
 
Spider!'s Avatar
 
Join Date: Dec 2008
Location: Houston, TX

idk bkos, but the ICD website still has manuals

http://www.icdproducts.com/paintball/manuals/04BKO.pdf

and there's good stuff on ICDO...

ICDO Forums Marker Talk BKO General talk
__________________
My Feedback
Spider! is online now   Reply With Quote
Old 04-04-2011, 02:32 AM   #5 (permalink)
older, working on wiser
 
zacgodwin's Avatar
 
Join Date: Mar 2011
Location: Evansville IN

thanks
will check it out
zacgodwin is offline   Reply With Quote
Old 04-04-2011, 08:33 PM   #6 (permalink)
Rec Poster
 
Join Date: Mar 2010

Make sure the bolt and pin are inserted correctly. To do this push the bolt forward and it should spring back by itself. Then make sure the bolt is not upside down. The two holes face down. If those are correct turn the LPR up untill you hear a small leak from the solenoid. Once you hear the leak turn it back about half a turn. Set HPR around 250ish. Let me know what happens if there are any questions or problems. As stated there is a much bigger ICD crowd at icd-owners.com
Viper588 is offline   Reply With Quote
Old 04-05-2011, 05:03 AM   #7 (permalink)
older, working on wiser
 
zacgodwin's Avatar
 
Join Date: Mar 2011
Location: Evansville IN

GOT IT. thanks guys for your input and information. it is always nice to get help from people who just want to help a guy out. Thank you
zacgodwin is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » ICD

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 09:39 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC