| ||LinkBack||Thread Tools||Search this Thread|
|08-27-2011, 12:30 PM||#1 (permalink)|
Owner of Crazy Cats
Ok at the shop, some guy bought a ICD BKO on ebay and it leaks like a sieve out of the solenoid (feels like the pressure relief area) and does the "creepy bolt" syndrome.
I have put new o-rings in the ram and LPR, tightened down the solenoid, and readjusted the LPR.
The bolt will also creep back and forth as if there is air going on both sides of the ram.
Could this mean that I will have to tell the guy that he might need a new solenoid?
thanks for any help guys
"I shoot pump because it hurts more feelings." -- ryantuomi (heard at Living Legends 2)
"Not everybody understands English... but everyone understands stick" - Big Sexy Medic
"Pumping is about as much a disadvantage for me as shifting is for a Nascar driver" - Ralanti (in an email between ryantuomi, ralanti and I about playing pump)
Thunder Bay Pump Club
|08-28-2011, 10:37 AM||#2 (permalink)|
Join Date: May 2007
Sounds as if the center oring on the solenoid pilot is either shot or rolled out of the groove. I would try to rebuild the noid before I bought a new one.
I like PPS, ICD and old Volkswagen products.
I am more than a block of wood.
ICD-O: The MCB of the ICD world, sorta...
|Thread Tools||Search this Thread|