BKO Solenoid screws

magmoormaster · 09-08-2011, 02:57 PM

So, I'm working on a BKO that the ram housing is stripped so the screws that hold the solenoid onto the ram don't really work. Because of this, I can't tighten the solenoid down onto the gasket so it leaks. I called ICD about it and they told me to try using longer screws, but I forgot to ask what thread pattern they are. Does anyone know?

Nobody · 09-08-2011, 05:30 PM

ICDO lists the screws at 1.6mm. but that lists the stock screws. i would try a 2-56 screw as a replacement. having someone tap them for the new size is suggested.

09-08-2011, 02:57 PM	#1 (permalink)
magmoormaster aka Maggy Moo Join Date: Jun 2009 Location: Provo, UT	BKO Solenoid screws So, I'm working on a BKO that the ram housing is stripped so the screws that hold the solenoid onto the ram don't really work. Because of this, I can't tighten the solenoid down onto the gasket so it leaks. I called ICD about it and they told me to try using longer screws, but I forgot to ask what thread pattern they are. Does anyone know? __________________ Model98.org, Where Tippmanns Have No Limits Feedback WTT 16" Stiffi Switch Tip for a 12" or 14" Tip GONE TIL NOV 2013

09-08-2011, 05:30 PM	#2 (permalink)
Nobody Post Whore Join Date: May 2007 Location: South Jersey	ICDO lists the screws at 1.6mm. but that lists the stock screws. i would try a 2-56 screw as a replacement. having someone tap them for the new size is suggested. __________________ Brand New Furious Harnesses for ICD electros Best place for all things ICD MCB_feedback AO_feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search