Paintball

[Litespeed]

Listen to Pump, the guy, like me, has been around ICD markers for years.

Seriously, I don't like hosed noid markers, which is why Pump and I are bushmaster whores, but the Promaster did suffer from similar issues beyond that.

The regs and valve will give you the most noticeable difference in efficiency and kick. I did have a BKOMaster with an ICDU aftermarket rammer and there was absolutely little recoil.

I would not spend money on an aftermarket bolt....

Hmm, okay deal with the Vlocity....if she works

Marker looks stock mostly.

Go for a valve first and they are harder to come by in the aftermarket world. PM hge2paintball on PBN for a ebay valve.

Some discussion on a new valve he may produce here
New Valve Called The Stealth - PbNation

For an HPR, I love AKA regs, but i've had luck with Evil Detonators and they are cheap. Rebuilding is a tad more complicated, but it just requires snap ring pliers and safety glasses if you aren't careful.

LPRs are either AKA SCM-IIIs or a modified micro-rock adapter from vaporworks or zenitram (Airsoldier has these).

[pump]

my opinions differ slightly ill add to his comments

Originally Posted by Litespeed

The regs and valve will give you the most noticeable difference in efficiency and kick. I did have a BKOMaster with an ICDU aftermarket rammer and there was absolutely little recoil.

i would also say if your in the mood....polish the regs it would help in its performance....but buying is easier....but not as fun

Originally Posted by Litespeed

I would not spend money on an aftermarket bolt....

unless you have a bad fitting bolt where you get blowback or air passing out the back of the top tube

Originally Posted by Litespeed

Go for a valve first and they are harder to come by in the aftermarket world. PM hge2paintball on PBN for a ebay valve.

LPRs are either AKA SCM-IIIs or a modified micro-rock adapter from vaporworks or zenitram (Airsoldier has these).

for any parts check out ICDO BST forums....lots of goodes there

[Litespeed]

Good points all.

1. Polishing is fun, just another excuse to buy more dremel attachments. Been there, done that!

2. I have so many bolts laying around, it is fairly easy for me to find a good bolt to mate to my markers with little blowback, etc....

3. ICDO BST.....yes yes

A Promaster just went for sale over there with many upgrades that would make you sick, so I won't post it....

[Clearush]

yeah I already signed up over at ICDO - from what I can tell there aren't any really necessary upgrade to make sure the marker functions properly -well except maybe the bolt if there is bad blow by.

[pump]

there might be the valve and the LP rammer kit

and LPR...thats nice

[Clearush]

Seems I done got scamed by a dead beat seller, Left my first negative e-bay feed back in 7 years. Working through paypal to get my money back.

[pump]

sorry to hear........but now this frees up your cash for a B2K....THEN we got something to work with

[Clearush]

nope Rainman Pump mag is on the horizon.

[Litespeed]

Sorry to hear that, but I can't blame you for wanting a Pump Mag.

I've thought about picking up a cheap classic to try it out myself.

Rainman does great work, I absolutely love my Pneumag. I sold my BKOmaster to fund my mech throw backs......2k Blazer, dble trigger and my classic Pneumag.

[pump]

pump mags and pneu mags are cool


i love my straight up mech


i want an Electritian pin for my mag....should make a snappier response