Paintball

[Litespeed]

The nerve....LOL

Ruin you rep? No, no, so you can go ahead and ship that Nasty out...

The bad eggs at ICDO comment took me by surprise frankly.

[pump]

check the bolt pin slot for metal lips scratching your bolt....making it hard to cycle

then polish ram, LPR, HPR housings, Polish ram piston




Cut top of tray as short as possible while still holding enough components, then make new manifold for barbs....buy barbed noid...sell stock noid for $$$$...............wait im getting a head of myself..........sorry

[Mactruc]

Think I need to bust out the old dremel, sit down with a nice 6pack and start reading, cutting, and breaking stuff.

[AGDRetro]

Originally Posted by pump

check the bolt pin slot for metal lips scratching your bolt....making it hard to cycle

I used a Mag o-ring to act as a bumper on the ram, which eliminated that issue for a friend. I think it was the larger o-ring on the top of the Mag On/Off.

[pump]

Originally Posted by AGDRetro

I used a Mag o-ring to act as a bumper on the ram, which eliminated that issue for a friend. I think it was the larger o-ring on the top of the Mag On/Off.

good job, but oh even with the large ID hole the hammer didnt slip?.....

most LPR and Dwell mistunning is due that that problem.......i seen some bad ones working on B2Ks.......you dont need a bumper to fix it....just make sure the hammer is screwed in all the way and the ram as well....and never pull the trigger with the bolt pin infront of the hammer slot. but most kids dont do those things and mistune the B2K to suckness

[zachsdad86]

Progress report?

[Mactruc]

Progress report... I traded away that B2k4 to someone who knew what they were doing. Kid I got it from had NEVER taken care of it I continued to find more and more issues with it.

Found a promaster on PB nation, added a little extra, and traded. Promaster is in amazing condition and shots like a champ!

Now for a new inline regulator and LPR maybe and I will be set.