Custom

[pb_sc]

I have a razorback 2 I was wondering how much you would charge to shorten and port the barrel and cut and drill and tap the body to except phantom feed necks

[Legion]

What kind of barrel porting are you after?im not sure about the feedneck though i remebr the razor backs being large not sure they can be tapped to fit phantom

[CamoDeafie]

theyre big enough to be tapped for the phantom screw for feed block otherwise, i think its easy..being 1" diameter all the way from the barrel tip to the asa

[pb_sc]

I am not to specific on what kind of a porting spiral or what ever is easy/cheap. I don't know if a feed block would fit I am just trying to make it stock class I don't care how

[CamoDeafie]

hey, how tall is your feedneck on the Razorback? if its tall enough, you could ask Legion to drill a 7/8th Inch hole parallel to the body in the feedneck, on 1 side, so that you can put a phantom or regular tubing into it to make your SC feedtube similar to the Gray Ghost SC model like the example from Bacci_paintball's thread... pic for example

Originally Posted by bacci paintball

Here is another one...Original Stock Class Ghost...


-Dan

[pb_sc]

Its tall enough how is that secured in?

[CamoDeafie]

looks like a couple of screws holding the feedtube in place.

[Legion]

That would be pretty simple to make

[pb_sc]

could you post or pm a price legion