Duckslide Modification

tiny · 10-25-2009, 06:45 PM

Hi there, I currently have a duckslide phantom and a set of Ti Longbow barrel backs. I'd like to use these together with a cocker threaded body and need a few pieces of work completed:

1) The duckslide kit can only support a barrel that has an OD of 0.875", the longbow back has a maximum OD of 0.952". Would you be able to remove some metal from the inside front of the duckslide such that it can accommodate the larger barrel back?

2) The duckslide kit only conceals a barrel up to 6" in length. The shortest length tip available for the longbow barrel is 12", would you be able to produce a barrel tip for my longbow backs such that the overall barrel length is 6"?

3) Would you be able to machine an ASP "Blockhead" phantom body? I'd need it milled down to the size of a typical phantom body but I would like grooves milled into the sides so that I can place bearings in them and allow the duckslide to move on these instead of directly on the metal.

If you can do any of this work please let me know, I'm an amateur at best with a mill and lathe so I'd rather have someone else handle my investment

Mar · 10-25-2009, 10:04 PM

Jake is in Iraq right now. He will be gone for some time.

tiny · 10-26-2009, 04:06 PM

Ah, thanks.

10-25-2009, 06:45 PM	#1 (permalink)
tiny MCB Member Join Date: Sep 2009 Location: Toronto, Ontario, Canada	Duckslide Modification Hi there, I currently have a duckslide phantom and a set of Ti Longbow barrel backs. I'd like to use these together with a cocker threaded body and need a few pieces of work completed: 1) The duckslide kit can only support a barrel that has an OD of 0.875", the longbow back has a maximum OD of 0.952". Would you be able to remove some metal from the inside front of the duckslide such that it can accommodate the larger barrel back? 2) The duckslide kit only conceals a barrel up to 6" in length. The shortest length tip available for the longbow barrel is 12", would you be able to produce a barrel tip for my longbow backs such that the overall barrel length is 6"? 3) Would you be able to machine an ASP "Blockhead" phantom body? I'd need it milled down to the size of a typical phantom body but I would like grooves milled into the sides so that I can place bearings in them and allow the duckslide to move on these instead of directly on the metal. If you can do any of this work please let me know, I'm an amateur at best with a mill and lathe so I'd rather have someone else handle my investment

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-26-2009, 04:06 PM	#3 (permalink)
tiny MCB Member Join Date: Sep 2009 Location: Toronto, Ontario, Canada	Ah, thanks.