| ||Thread Tools||Search this Thread|
|06-26-2011, 06:45 PM||#1 (permalink)|
Red - Black
What cup seal to replace a Hammer Cup Seal?
What type of cup seal can be used to replace a Hammer Cup Seal? I am assuming it is a nelson cup seal - but I have been out of this market so long that I don't know.
I guess what I mean to say is - what is available for order that can be used. (I am asking for a friend).
Pumpenstein - NSA National Champions
TF's MCB Trust.
|06-29-2011, 02:18 PM||#3 (permalink)|
Join Date: Apr 2007
...I just had a Hammer here the other week. Meant to compare it's valve to my Phantom...but was too lazy to tear the Phantom down...
I'll see if I can get the Hammer back over...damn kid who owns it is a flake though.
Charlie Fox Crew Paintballer
Customer of Flo's Flowers and Paintball
Pico Rivera, California
|07-04-2011, 02:01 AM||#4 (permalink)|
aka Maggy Moo
Join Date: Jun 2009
Location: Provo, UT
The cup seal in mine is definitely NOT the same as a standard spyder. The edge that seals against the valve nut tapers a bit.
|07-04-2011, 09:59 AM||#5 (permalink)|
Join Date: Jul 2006
Location: Coventry R.I.
the hammer seals are rounded and sit down in the valve seat, spyders are flat and sit on top of their valve seat. they are made of the same material.
I have put flat nelson style cup seals on Hammers, but you need to polish the very top of the valve seat or they can leak.
|08-16-2011, 06:52 PM||#7 (permalink)|
Join Date: Jan 2010
Be careful you have to watch out. Depending on which model hammer it is it can vary. I have one that came with the cup seal linked above, I think it may have been the foreign marketed hammer. Others however just use standard nelson cup seals. If you know what model hammer you have I should be able to check for you.
|08-16-2011, 06:59 PM||#8 (permalink)|
Here's a picture of the cup seal on my Hammer P...
Here's a picture of my Hammer P using a standard spyder cup seal...
Not the same, but if it seals it works.
Nunquam emere potes facere
|12-03-2011, 01:22 AM||#10 (permalink)|
Join Date: Aug 2011
Location: Carson City, Nevada
Here is a pic of the differences between the two, the cup seal on the left is for a Hammer (beveled edge) and the cup seal on the right is a standard Spyder cup seal (non beveled edge)....
Old School is the best play.........Pumping things one ball at a time or when my girlfriend says I can........
|Thread Tools||Search this Thread|