| ||Thread Tools||Search this Thread|
|07-31-2007, 01:20 AM||#2 (permalink)|
Sounds like your sear isn't catching the hammer.
Take the grip frame off and check to see if the sear is rounded off or otherwise worn. Also check the notch in the hammer for any wear there.
If either one is worn, they'll need replacing.
|07-31-2007, 01:36 AM||#3 (permalink)|
Join Date: Mar 2006
Location: The Group W Bench
Sear and or hammer o ring, check that red oring too.
Dealer for APP, CCI, Nelson, Leland, Valken, Tippmann, & Procaps.
Please donate to make a difference in my fathers life
Willing to be a 3rd party for shipments to Canada anywhere in the world just PM me.
Buy a Celanis Paintball Patch for a good cause
http://stationcaster.com/player_skin...=4751&f=855201 < Radio Ad
|07-31-2007, 02:47 AM||#4 (permalink)|
Join Date: Oct 2006
Yeah, it's not quite blowing back far enough. Try cleaning and lubing it and shoot a couple of drops of oil through the ASA so the valve insides get oiled up as well. Shoot it through with some air and leave the barrel off for these firings so you don't mist it with oil. When it shoots without the fine mist coming out you're good to wipe it down and put the barrel back on.
I had a "Paintball God" moment once.
Like Al Bundy's Polk High football moment I live on
for the slim chance of repeating that one time
miracle in some small way.........
|Thread Tools||Search this Thread|