Hammer7 Side Air -INPUT NEEDED-

super_stanchy · 01-03-2013, 11:43 AM

I have a straight BBA ASA input thread.

Making a 2nd thread for a Phantom Style Side Air Valve.

Choices would be....

Single Port Right
Single Port Left
Dual Side Ports (Left and Right)
Rear
Rear + Side (remote and a gauge perhaps?)

Pricing....
Same Ballpark
$20/$30/$40

More holes=more money (keep that in mind)

Purely Interest.
If I made them, they would be
-Dust Black
-Flush with the back of the frame
-Steel Thread insert for Grip screw
-1/8npt pipe threads in the ports

Stanchy

danssoslow · 01-03-2013, 12:19 PM

This I'd be in on. If you could make one with all three ports, rear, left, and right (makes sense for both sides, just in case plumbing the off side, left or right handed; rear to install a guage) and keep it under/around the $40 range, I'd be all over it.

flyinggobbo · 01-03-2013, 05:19 PM

I'd buy one with a left side or more port for sure.

Keebler · 01-03-2013, 05:21 PM

Can you do a bba that also has a port in the side?

pk5 · 01-03-2013, 05:22 PM

What about under? For air through grip.

Keebler · 01-03-2013, 05:24 PM

I always wanted a false bba. Let me explain. Basically tank goes in the back as always except there no air hole there. The exits out the side into a sideline stab. The than goes from that into another port in the side of the valve

super_stanchy · 01-03-2013, 05:26 PM

Quote:

Originally Posted by Keebler

Can you do a bba that also has a port in the side?

YES

but it would probably be a one off thing....
unless there was enough interest

Quote:

Originally Posted by pk5

What about under? For air through grip.

possibly, but Gas Through usually requires a bunch of other stuff
-Drilling grip frame
-Milling Breech
-Drill/Tap ASA

I could do it, but again it would be a one off kinda thing

flyinggobbo · 01-03-2013, 05:33 PM

What do you think it'd cost to do an air through grip on one of these? Just an estimate.

super_stanchy · 01-03-2013, 05:40 PM

Quote:

Originally Posted by flyinggobbo

What do you think it'd cost to do an air through grip on one of these? Just an estimate.

I think i charged $125 for a GTG Phantom

and i know them like the back of my hand, im not sure on this one

nerdcore · 01-03-2013, 07:31 PM

Voted left side only for around $20, and left+rear for about $30.

Reason i chose left side instead of both sides is i'd want to run the line forward & down, then around to the asa (either front fitting or side fitting), like it'd be following a long trigger guard, but don't want the line to interfere with the mag release button, which is on the right hand side.

Rear is just nice if one wanted to run a line similar to a reducer, or put a gauge, although a gauge seems inconsequential unless one were fine-tuning the op. I don't plan on tweaking the internals, outside of running different springs in case the velocity isn't acting right.

Gas-thru-grip is a cool idea, but the amount of work & cost involved makes it impractical for the price point of the pump itself.

View Poll Results: Hammer7 Side Air -INPUT NEEDED- Vote for all that Apply
Right Side Only	2	9.52%
Left Side Only	4	19.05%
Dual Sides (Left and Right)	7	33.33%
Rear Only	1	4.76%
Rear + Right Side	1	4.76%
Rear + Left Side	2	9.52%
Rear + Left and Right	8	38.10%
Interested for under $20 before Shipping	8	38.10%
Interested for under $30 before Shipping	7	33.33%
Interested for under $40 before Shipping	5	23.81%
Multiple Choice Poll. Voters: 21. You may not vote on this poll

01-03-2013, 11:43 AM	#1 (permalink)
super_stanchy The Man With No Plan Join Date: Nov 2008 Location: Camas, WA	Hammer7 Side Air -INPUT NEEDED- I have a straight BBA ASA input thread. Making a 2nd thread for a Phantom Style Side Air Valve. Choices would be.... Single Port Right Single Port Left Dual Side Ports (Left and Right) Rear Rear + Side (remote and a gauge perhaps?) Pricing.... Same Ballpark $20/$30/$40 More holes=more money (keep that in mind) Purely Interest. If I made them, they would be -Dust Black -Flush with the back of the frame -Steel Thread insert for Grip screw -1/8npt pipe threads in the ports Stanchy __________________ Ryan "Super_Stanchy" Stanchfield MCB Feedback I do Freak Boring FOR SALE: SSC Pump Angel #2 SSC Aurora Mech Ion Texas Storm Timmy SSC Phantom Internals, Cocker Valve Tools, and other goodies IN STOCK!

01-03-2013, 05:19 PM	#3 (permalink)
flyinggobbo A Room with a Moose! Join Date: Jun 2008 Location: Edwardsville, IL	I'd buy one with a left side or more port for sure. __________________ Feedbacky Goodness:http://www.mcarterbrown.com/forums/f...-feedback.html Rule #14: "Mad Science" means never stopping to ask "what's the worst thing that could happen?" Ƿyrd bið ful aræd

01-03-2013, 05:21 PM	#4 (permalink)
Keebler MCB Member Join Date: Jun 2009	Can you do a bba that also has a port in the side? __________________ If you want to talk email me. I won't be talking on here anymore. Wagz86@gmail.com or Facebook Matthew Wagner PS3 network: Keebler1337 Aka "wagz" on the field http://www.mcarterbrown.com/forums/f...-feedback.html

01-03-2013, 05:22 PM	#5 (permalink)
pk5 Stardust Memory Join Date: Sep 2006 Location: San Diego	What about under? For air through grip. __________________ Feedback http://www.mcarterbrown.com/forums/f...-feedback.html

01-03-2013, 12:19 PM	#2 (permalink)
danssoslow MCB Member Join Date: Sep 2011	This I'd be in on. If you could make one with all three ports, rear, left, and right (makes sense for both sides, just in case plumbing the off side, left or right handed; rear to install a guage) and keep it under/around the $40 range, I'd be all over it.

01-03-2013, 05:24 PM	#6 (permalink)
Keebler MCB Member Join Date: Jun 2009	I always wanted a false bba. Let me explain. Basically tank goes in the back as always except there no air hole there. The exits out the side into a sideline stab. The than goes from that into another port in the side of the valve __________________ If you want to talk email me. I won't be talking on here anymore. Wagz86@gmail.com or Facebook Matthew Wagner PS3 network: Keebler1337 Aka "wagz" on the field http://www.mcarterbrown.com/forums/f...-feedback.html

01-03-2013, 05:33 PM	#8 (permalink)
flyinggobbo A Room with a Moose! Join Date: Jun 2008 Location: Edwardsville, IL	What do you think it'd cost to do an air through grip on one of these? Just an estimate. __________________ Feedbacky Goodness:http://www.mcarterbrown.com/forums/f...-feedback.html Rule #14: "Mad Science" means never stopping to ask "what's the worst thing that could happen?" Ƿyrd bið ful aræd

01-03-2013, 07:31 PM	#10 (permalink)
nerdcore Radical! Join Date: Nov 2009 Location: NishNash	Voted left side only for around $20, and left+rear for about $30. Reason i chose left side instead of both sides is i'd want to run the line forward & down, then around to the asa (either front fitting or side fitting), like it'd be following a long trigger guard, but don't want the line to interfere with the mag release button, which is on the right hand side. Rear is just nice if one wanted to run a line similar to a reducer, or put a gauge, although a gauge seems inconsequential unless one were fine-tuning the op. I don't plan on tweaking the internals, outside of running different springs in case the velocity isn't acting right. Gas-thru-grip is a cool idea, but the amount of work & cost involved makes it impractical for the price point of the pump itself. __________________ MCB ferdberk Middle TN rec players thread

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search