Hammer 7 Bolt - Page 4

heinous · 01-15-2013, 03:53 PM

but brass is soft, it might wear out at the sear area.

Keebler · 01-15-2013, 03:55 PM

That's where I have to defer to you guys. Who it be any softer than hard anodized aluminum? I really don't know

tymcneer · 01-15-2013, 04:08 PM

If we were looking for the best pump stroke, we would need to work on both the bolt and the hammer.

The bolt controls the feel as you move the pump backwards, as it is a bearing surface. If we were to add delrin slide pads, we might feel an improvement.

As stated above, the anti kink hammer/bolt determines the feel on the closing stroke, with some of the feel being determined by the bolt as it rides in the body.

Ty

capitalpaintball · 01-15-2013, 04:20 PM

Quote:

As far as the tpc sliding through the hammer it doesn't. It slides over the pt through the spring I don't think it ever passes through the hammer. Once again I could be wrong

Yes on the H7 the tpc does not pass thru the hammer. the brass hammer slides into the back of the bolt. this is the anti kink point.

on the Trracer the tpc slides thru the hammer.

more proof that "nelson base" is just a general term.

Polishing does help. My H7 is butter smooth. I used a little mothers aluminum polish on the inside of the body and the top of the hammer.

super_stanchy · 01-16-2013, 03:24 PM

waaaasssaabiiiii

what if you made a new bolt that was compatible with a CCI TPC?

or did i miss that post?

tymcneer · 01-16-2013, 06:53 PM

No one proposed that particular idea... I will have to think it through.

Ty

Keebler · 01-16-2013, 06:58 PM

It's actually not that awful of an idea. I guess it would depend on how the tpc I'D than interacts with the stock PT but I suppose since the I'D of the stock PT is pretty small. Another option could be to swap that out for a Phantom PT as well. Along with the cup seal since the hammer cup seal is having issues as well. Et viola its a baby

tymcneer · 01-16-2013, 09:01 PM

Phantom power tubes will likely be *way* too short. The Hammer has a slight change in the geometry, but I have no actually compared them/traded those parts.

Ty

danssoslow · 01-16-2013, 09:18 PM

I don't really have any input to put in on this, as I have no idea what needs to be improved.

I do wonder though, with SSC looking into making a BBA, is there another similar gun with more commonly available parts and upgrades that both of you could work together on adapting into the Hammer?

tymcneer · 01-17-2013, 02:55 AM

Not exactly sure... I seem to have missed something SSC is planning to do... I guess I need to look around.

Ty

01-15-2013, 03:55 PM	#32 (permalink)
Keebler MCB Member Join Date: Jun 2009	That's where I have to defer to you guys. Who it be any softer than hard anodized aluminum? I really don't know __________________ If you want to talk email me. I won't be talking on here anymore. Wagz86@gmail.com or Facebook Matthew Wagner PS3 network: Keebler1337 Aka "wagz" on the field http://www.mcarterbrown.com/forums/f...-feedback.html

01-15-2013, 04:08 PM	#33 (permalink)
tymcneer Brass Monkey Customs Join Date: Oct 2006 Location: Baltimore MD	If we were looking for the best pump stroke, we would need to work on both the bolt and the hammer. The bolt controls the feel as you move the pump backwards, as it is a bearing surface. If we were to add delrin slide pads, we might feel an improvement. As stated above, the anti kink hammer/bolt determines the feel on the closing stroke, with some of the feel being determined by the bolt as it rides in the body. Ty __________________ Brass Monkey Customs If you were doing business with me via text message, please send me a text with your name, as my phone has killed my contact list. Thank you in advance. Brass Freak compatible and Equation inserts in .665, .670, .675, .678, .680 and .685 Still selling brass tubing, with .678 barrel stock now available! My feedback: MCB - eBay - AO

01-16-2013, 03:24 PM	#35 (permalink)
super_stanchy The Man With No Plan Join Date: Nov 2008 Location: Camas, WA	waaaasssaabiiiii what if you made a new bolt that was compatible with a CCI TPC? or did i miss that post? __________________ Ryan "Super_Stanchy" Stanchfield MCB Feedback I do Freak Boring FOR SALE: SSC Pump Angel #2 Metadyne Havoc Launcher SSC Aurora Mech Ion Texas Storm Timmy SSC Phantom Internals, Cocker Valve Tools, and other goodies IN STOCK!

01-16-2013, 06:53 PM	#36 (permalink)
tymcneer Brass Monkey Customs Join Date: Oct 2006 Location: Baltimore MD	No one proposed that particular idea... I will have to think it through. Ty __________________ Brass Monkey Customs If you were doing business with me via text message, please send me a text with your name, as my phone has killed my contact list. Thank you in advance. Brass Freak compatible and Equation inserts in .665, .670, .675, .678, .680 and .685 Still selling brass tubing, with .678 barrel stock now available! My feedback: MCB - eBay - AO

01-16-2013, 06:58 PM	#37 (permalink)
Keebler MCB Member Join Date: Jun 2009	It's actually not that awful of an idea. I guess it would depend on how the tpc I'D than interacts with the stock PT but I suppose since the I'D of the stock PT is pretty small. Another option could be to swap that out for a Phantom PT as well. Along with the cup seal since the hammer cup seal is having issues as well. Et viola its a baby __________________ If you want to talk email me. I won't be talking on here anymore. Wagz86@gmail.com or Facebook Matthew Wagner PS3 network: Keebler1337 Aka "wagz" on the field http://www.mcarterbrown.com/forums/f...-feedback.html

01-16-2013, 09:01 PM	#38 (permalink)
tymcneer Brass Monkey Customs Join Date: Oct 2006 Location: Baltimore MD	Phantom power tubes will likely be way too short. The Hammer has a slight change in the geometry, but I have no actually compared them/traded those parts. Ty __________________ Brass Monkey Customs If you were doing business with me via text message, please send me a text with your name, as my phone has killed my contact list. Thank you in advance. Brass Freak compatible and Equation inserts in .665, .670, .675, .678, .680 and .685 Still selling brass tubing, with .678 barrel stock now available! My feedback: MCB - eBay - AO

01-16-2013, 09:18 PM	#39 (permalink)
danssoslow MCB Member Join Date: Sep 2011	I don't really have any input to put in on this, as I have no idea what needs to be improved. I do wonder though, with SSC looking into making a BBA, is there another similar gun with more commonly available parts and upgrades that both of you could work together on adapting into the Hammer?

01-17-2013, 02:55 AM	#40 (permalink)
tymcneer Brass Monkey Customs Join Date: Oct 2006 Location: Baltimore MD	Not exactly sure... I seem to have missed something SSC is planning to do... I guess I need to look around. Ty __________________ Brass Monkey Customs If you were doing business with me via text message, please send me a text with your name, as my phone has killed my contact list. Thank you in advance. Brass Freak compatible and Equation inserts in .665, .670, .675, .678, .680 and .685 Still selling brass tubing, with .678 barrel stock now available! My feedback: MCB - eBay - AO

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search