mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Kingman (http://www.mcarterbrown.com/forums/kingman/)
-   -   MR5 Magazines, tight fit... (http://www.mcarterbrown.com/forums/kingman/227394-mr5-magazines-tight-fit.html)

240SX 02-27-2013 08:02 AM

MR5 Magazines, tight fit...
 
So I got my mech MR5 in the mail yesterday and I have to say, for what you're paying it's a very nice marker. I purchased a few of the straight FS magazines for my MR5 and Hammer 7 and the magazines fit great in the H7 (very smooth attachment and release), however they are a very tight fit in the MR5. Is this something that just has to be broken in or something that needs to be changed? They are tight to the point where you have to hit them underneath to get them to click in and they are quite difficult to remove.

Eskie 02-27-2013 09:25 AM

It just needs to be broken in. I spent 5 minutes just inserting each magazine and pulling it out, now it's all silky smooth.

240SX 02-27-2013 10:13 AM

Were the mags very difficult to get in there? The mag that came with the marker works perfect it's just the additional ones that I bought that are fitting tight.

Eskie 02-27-2013 12:16 PM

The first few times were really tight. I noticed that the magazines weren't going in smoothly until the sharp angles on the top steps of the magazine were worn smooth a little.

The angle of insertion also takes some practice to get right, but things do get easier and more forgiving eventually.

240SX 02-27-2013 12:19 PM

Thanks.


All times are GMT -4. The time now is 08:00 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC