mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Kingman (http://www.mcarterbrown.com/forums/kingman/)
-   -   Hammer 7 problems (http://www.mcarterbrown.com/forums/kingman/228212-hammer-7-problems.html)

bellicose 03-07-2013 06:32 PM

Hammer 7 problems
 
Just got my new Hammer 7, and 4 mrx mags. I screw in my ninja 13ci tank, the marker leaks out of the barrel. I figure it is because I have almost no air left in it. Switch to my bulk co2 tank. No leak out barrel, unless I lean to the side. I think the tank is too heavy for the back bottle. The main problem however, is that I cannot get velocity up past 230s. Ideas?

Keebler 03-07-2013 06:46 PM

Your air tank may not be high enough pressure output. Often time the cup seal that comes with the gun seems to be bad. Switch out the spare one and see if that's it

bellicose 03-07-2013 06:57 PM

How does it come off? I briefly tried to get it off, but it seemed glued.

Keebler 03-07-2013 08:32 PM

It's threaded. Some came with dabs of loctite some didn't. Elbow grease is all I used

panhead4411 03-07-2013 09:54 PM

I hope Spyder is noticing all these threads popping up of their factory cup seals being bad...

Keebler 03-07-2013 10:13 PM

They sent a replacement no biggy

bellicose 03-07-2013 10:19 PM

Will this boost the fps?

Keebler 03-07-2013 10:28 PM

Your leaking through the pt that's what's causing that. That and potentially your low tank output


All times are GMT -4. The time now is 06:56 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC