| ||Thread Tools||Search this Thread|
|07-26-2013, 07:27 PM||#1 (permalink)|
Join Date: Jul 2013
MR5 + Fasta
So, some of you may have seen my brothers MR5 Thompson conversion he is working on, so i thought i would document some of the modifications i have made to my MR5 also.
to start it off i have a 9v Fasta loader modified to 18v, this modification is common knowledge and very easy to do...
however i went about it a bit differently, i made a 9v/18v selector switch so that i dont have to use up both batteries when i don't need and excessive rate of fire.
unfortunately there are no W.I.P pictures as i didn't take any, and i don't have an overwhelming desire to take it apart to take some. (its pretty packed)
so, instead here is a circuit diagram of how i hooked up the second battery.
Cost of mod = $3.59 NZD + time
more modifications to come.
|Thread Tools||Search this Thread|