| ||Thread Tools||Search this Thread|
|01-14-2014, 09:30 PM||#1 (permalink)|
Has anyone essentially taped 2 mags together? So you can flip it and have another 9. I know you can't just tape them together because of the spring on the side of the mag. Looking for something I could purchase but have an idea for a do it yourself project!
My feedback http://www.mcarterbrown.com/forums/f...-feedback.html
LOOKING FOR A TIBERIUS RISER !!
|01-16-2014, 03:52 PM||#2 (permalink)|
Join Date: Jul 2013
there is alot of empty space inside the mags, if your up fora bit of DIY, you could put a bolt through them with a bolt as a spacer between them, this will require you to re assemble the mags while they are coupled to make it look really neat though.
this wouldalso require a 180 degree rotation of the mags, rather than plain old side by sides, could possibly see if you can modify the pin guide on the pusher if your a DIY type of guy.
|01-29-2014, 04:07 PM||#4 (permalink)|
Join Date: Dec 2008
Location: Houston, TX
You could use something springy, like a pair of short plastic tubes on their sides. Tape those and the mags together. Use the mag with the inside stack release first, even though you should have room to put your finger in there.
shake 'n bake > rock 'n cock
Last edited by Spider!; 01-29-2014 at 04:31 PM.
|Thread Tools||Search this Thread|