mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Kingman (http://www.mcarterbrown.com/forums/kingman/)
-   -   What am I doing wrong? (http://www.mcarterbrown.com/forums/kingman/24947-what-am-i-doing-wrong.html)

Murph 10-26-2007 07:15 PM

What am I doing wrong?
 
I'm resurecting a chromed, taso frame equipped spyder I rescued from craigslist, right now I'm stumped. After polishing the hell out of the lower tube, in effect peeling all the chrome plating left in there and leaving a smoother surface, no matter what I do, it leaks out the LPC threads (This is a full size fatty striker body, the LPC threads into the front, a VA threads into the body itself.) I've put a TON of teflon tape onto the LPC, tried replacing and greasing the O-ring on it, no matter what I do it still leaks out of there. I think it's even the last leak I need to fix before the marker will finally cycle in the hammer slot again (I kinda destroyed the bolt removing it. I think I'm gonna find a cooper T bolt.)

Also, what size is the O-ring on the fatty hammer, I can't find ANY rebuild kits for fatty-striker equipped spyders anymore.

Jackson 10-26-2007 09:24 PM

I had that same issue with one of my Spyders. The only way I solved it was TONS and TONS and TONS of Teflon tape. Eventually I just bit the bullet and bought a new vertical adapter.

Murph 10-26-2007 10:29 PM

the new vertical adaptor is not an option with this spyder. the LPC and vertical adaptor on this reciever predates the front-block setup.

spanky1205 10-26-2007 11:53 PM

Is the oring on you LPC in good shape? Could you replace the oring with something a little thicker for a tighter fit? Do you have a different LPC around to try out? Maybe it is the LPC itself.

CamoDeafie 10-27-2007 12:00 AM

32 degrees makes the vertical adapter for these things. Pirahna STBBs are also compatible in terms of o-rings and parts, only difference is the brass valve retaining screw, its american vs the spyder's metric. ive heard of LPCs being given a wide varience in terms of fitment on spyders. other than that, i believe just about any bolt will work on the spyder :)

Chaos 10-27-2007 12:35 AM

Hey Murph,Talk to PW,he should be able to help you and I can pick up any parts you need

Walking_Target 10-27-2007 01:27 AM

gotta romance her a lil first, buy her dinner and so forth before trying to screw the vertical adapter in. spyders are picky like that

Railgun 12-02-2007 04:15 PM

Can't help much on the LPC issue other than what the others have said. But the fatty hammers are the same size as PMI Piranha hammers and a soft Piranha hammer Oring is what you're looking for.


All times are GMT -4. The time now is 11:54 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC