| ||Thread Tools||Search this Thread|
|01-18-2014, 02:03 PM||#1 (permalink)|
Baller, shot caller...
Join Date: Dec 2011
Location: Salem, Oregon
I present my Hammer 7 12 gauge project
Ive posted a pic of this on Facebook in some groups but here it is on the forum finally! Also a note, im still working on it but it is functionally complete. The rest is just cleaning up, tweaking, adjusting and a few small things to make it look better.
I just copied and pasted from my facebook so here it is
Due to the overwhelming amount of positive feedback ive got on my one crap picture of this on my kitchen floor, i decided to take some better ones for you all. Enjoy! Also, i listed the mods in the post rather than the comments section.
-grip frame is from a 1990 Warpaint International Warlord pump, hence the name of it being Warlord. I had to modify the trigger and sear as well as make a special bracket to mount it securely.
-feed tube is from Rap4. Its a 20rd spring feed for the T68 Firestorm pistol. It does not just slide onto a rail . I ground off the the lip from the rail so its just an aluminum block. Then ground a little extra off and drilled a hole through to line up with the frontmost silver pin on the feedtube so it locks in place with it.
-The pump grip is for a real Mossberg. Its called a Mossberg Flex. I had do sand down a ton off the stock pump grip but it fits nice and is screwd on using the screws that hold the bottom rail on the grip.
-the adapter that allows the stock to mount is Made by GaT Products and costs $25. It works awesome and actually can fit many other markers with rear ASA's like this.
-The front barrel clamps are just simple 12gauge barrel clamps
-i use the stock barrel but added a Lapco .685 bore sizer to make it the length i need and also a bit smaller of a bore
-Up top ive got Fiber optic 12 gauge sights.
-the marker is not magazine compatible anymore unless i replace the original grip frame.
-it holds 21 rounds.
I have a couple more mods to go and ill post pics when theyre done. Again, thanks for the support and feel free to share it around. Just please give me credit where its due
|07-09-2014, 10:14 PM||#2 (permalink)|
Join Date: Sep 2008
Location: Chattanooga, TN
Jiggles, I was inspired by your awesome build to try something of my own with a RAP4 feed: http://www.mcarterbrown.com/forums/c...pringfeed.html
I think I may have wrestled with some of the same issues with this feed that you did.
|Thread Tools||Search this Thread|