Finally finished the Imagine...for now - Page 2

super-cameron · 01-24-2008, 12:16 PM

Dishka
OPSGEAR

5 inch barrel= me + hacksaw + miter box + dremel + sanding wheel attachment

The key is getting one with no porting, or cutting it off before the porting. I can cut one for you if you'd like....wait, that didn't sound right....

Brinstar · 01-24-2008, 12:17 PM

Quote:

Originally Posted by Venge

Could you please link to the 5 inch barrel with Spec Ops Dishka Flash Suppressor (Cannonizer) on their site...I crawled all over that site and couldnt find such a thing

Think it's made by ops gear rather than special ops.
OPSGEAR

[edit]beaten to it[/edit]

super-cameron · 01-24-2008, 12:22 PM

my bad.

GanonsGrin · 01-25-2008, 12:44 PM

A suitable replacement to the dishka is a barrel adaptor. I run a cocker barrel on my spyder, but if i just use the adaptor for it alone on the gun, it makes it like a 1 and a half inch barrel that is louder than the dishka. It puts a WHOOOOLE lot more of the metallic ping to it than the dishka does. Very very noticeable.

pinkanese · 01-25-2008, 03:55 PM

Quote:

Originally Posted by super-cameron

Just put it on that other site in the Spyder of the month so I can win nothing and gain the respect of no one I care about.

Spyder Of the month Jan 08 - PbNation

And apparently I'm losing to an MR1 with a body kit......nice.

I voted for you, of course you get my respect for simply putting a stock on that gun and posting it on pbNation.

I think it looks real nice, I have that same basic stock, they are amazing for those of you that haven't held one. I think you need a scope/red dot for it though.

Good Luck.

GanonsGrin · 01-26-2008, 10:45 AM

Unless you mounted one through the top rail, you can't put a scope or anything on it unless you made it custom. Our Imagines don't have a dovetail on top, it's just a bar that SHOULD have been cut into a dovetail but Spyder obviously didn't think of that. That is the ONE thing I don't like about the Imagine. The ONLY thing.

Omegara · 02-02-2008, 01:24 PM

I voted for you too Super, the kit looked nice but not really custom

TheAznInvazn · 02-05-2008, 08:19 PM

Nice Imagine!

#1 Spyder for tinkering IMO.

GanonsGrin · 02-06-2008, 11:36 AM

I think mounting a paintball gun into an airsoft shell is LAME LAME LAME! There's no creative thinking involved, just cutting plastic away until your gun fits in it. The guy who made that one also makes other "custom" guns out of airsoft kits. Someone on his site asked him how he made them but he said he couldn't tell because it's his "business" and he can't give away his methods. But then he goes on to say something stupid about being able to buy airsoft guns online to use. What a wang!

spymongoose · 02-06-2008, 12:08 PM

I politely dissagree. Ergonomics is a big part of the feel of paintgun. While paintball ergomonics have evolved in several ways, like bottomlines to account for paintball masks and no recoil to absorb, there are a lot of ergonomic touches that a firearm may have that paintball guns have left behind.

01-24-2008, 12:16 PM	#11 (permalink)
super-cameron The Amazing Spyder Man Join Date: May 2007 Location: Kingsport, TN Posts: 865	Dishka OPSGEAR 5 inch barrel= me + hacksaw + miter box + dremel + sanding wheel attachment The key is getting one with no porting, or cutting it off before the porting. I can cut one for you if you'd like....wait, that didn't sound right.... __________________ Thanks! -Cameron Team Spin, Old School Division cameronkbyrd@gmail.com www.theoaksjohnsoncity.com Oaks Audio: http://www.theoaksjohnsoncity.com/audio.aspx My feedback: http://www.mcarterbrown.com/forums/f...tml#post240155

01-24-2008, 12:22 PM	#13 (permalink)
super-cameron The Amazing Spyder Man Join Date: May 2007 Location: Kingsport, TN Posts: 865	my bad. __________________ Thanks! -Cameron Team Spin, Old School Division cameronkbyrd@gmail.com www.theoaksjohnsoncity.com Oaks Audio: http://www.theoaksjohnsoncity.com/audio.aspx My feedback: http://www.mcarterbrown.com/forums/f...tml#post240155

02-02-2008, 01:24 PM	#17 (permalink)
Omegara Rec Poster Join Date: Sep 2007 Location: New Jersey! Posts: 86	I voted for you too Super, the kit looked nice but not really custom __________________ Omega Ra Spyder Pilot ACS DH titanium striker, 32* spring kit, Dye hyper 3 reg, ccm no-rise feedneck, X-customs Hall FX kit & NV trigger, ACP bolt, trinity 15* frontblock, NDZ asa/rail, SP all american barrel, T-board Ver C, 32* mangaport valve & pin, blue laser eyes, trinity grips, dye membrane pad Originally posted by OneUp: the reason I rock a spyder is because I have a big enough **** to not need even a $300 gun to compensate, let alone a $1000 gun....

02-06-2008, 12:08 PM	#20 (permalink)
spymongoose Pump Ninja Join Date: Apr 2007 Location: Vegas Baby! Posts: 783	I politely dissagree. Ergonomics is a big part of the feel of paintgun. While paintball ergomonics have evolved in several ways, like bottomlines to account for paintball masks and no recoil to absorb, there are a lot of ergonomic touches that a firearm may have that paintball guns have left behind. __________________ My Feedback My Gallery

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-25-2008, 12:44 PM	#14 (permalink)
GanonsGrin Keeper of the Grail! Join Date: Aug 2007 Location: Kingsport, TN Posts: 208	A suitable replacement to the dishka is a barrel adaptor. I run a cocker barrel on my spyder, but if i just use the adaptor for it alone on the gun, it makes it like a 1 and a half inch barrel that is louder than the dishka. It puts a WHOOOOLE lot more of the metallic ping to it than the dishka does. Very very noticeable.

01-26-2008, 10:45 AM	#16 (permalink)
GanonsGrin Keeper of the Grail! Join Date: Aug 2007 Location: Kingsport, TN Posts: 208	Unless you mounted one through the top rail, you can't put a scope or anything on it unless you made it custom. Our Imagines don't have a dovetail on top, it's just a bar that SHOULD have been cut into a dovetail but Spyder obviously didn't think of that. That is the ONE thing I don't like about the Imagine. The ONLY thing.

02-05-2008, 08:19 PM	#18 (permalink)
TheAznInvazn Active Member Join Date: Feb 2008 Location: SA Town, Texas Posts: 140	Nice Imagine! #1 Spyder for tinkering IMO.

02-06-2008, 11:36 AM	#19 (permalink)
GanonsGrin Keeper of the Grail! Join Date: Aug 2007 Location: Kingsport, TN Posts: 208	I think mounting a paintball gun into an airsoft shell is LAME LAME LAME! There's no creative thinking involved, just cutting plastic away until your gun fits in it. The guy who made that one also makes other "custom" guns out of airsoft kits. Someone on his site asked him how he made them but he said he couldn't tell because it's his "business" and he can't give away his methods. But then he goes on to say something stupid about being able to buy airsoft guns online to use. What a wang!