Paintball

[Stroker_Turbo]

Ok sounds cool.
Just let me know I am not in a huge hurry over this. Its not like I dont have another gun "sometimes I wish I didnt"...
My old one is on the way to Rainman for a different look.

[DarkNinja]

I sent you a pm, I found that spare body. If your interested its here.

[Azzy]

Originally Posted by DarkNinja

My Trracers screw didn't fit my Mavericks valve body so I guessed that they were all different..

Ive seen that on a few valve bodies. Somewhere in the runs they switched the threading ever so slightly, so one is too tight to accept the brass nut.

Older ones IIRC are the same threading as most other guns, mine fit easy into a razorback valve body.

[DarkNinja]

I have a few of them around here and some seem to work with the other nelsons valve screws, and some don't. I was very surprised when I found that a standard, american threaded nelson screw worked in a kingman-loves-odd-metric-screws-and-likes-being-difficult hammer valve body.

[pizzadude]

Hi all,

I know that this thread is kinda old and you've all moved on to other stuff, but I really could do with some help.

I recently purchased two unbranded pump markers (sold as Mayhem Crossball II - I think they're Euro Kingman Hammer 'P' equiv.) and after my first couple of games, I realised that standing out in the open against two Ion's on crack, just wasn't working.

So I decided to snipe instead and enthusiastically stripped the one marker to drop off at a local machine shop for mods. Then I realised that I actually only had one set of internals.

I've tried just about everywhere on the net to find spares for the Hammer/Crossball, but everyone has either sold out or stopped stocking them. (or not replied to emails)

So here's the question: Do any of you know what other markers I can strip of all internals (from bolt to ASA adapter) and fit directly into the Hammer breech with little or no modification - Trracer, Stingray, Talon, Phantom, Hornet etc... ?

Any help would be really appreciated.

[pizzadude]

Has anyone tried to swop out a complete set of internals from ... say a (Trracer to a Maverick body/breech) or (Phantom breech to Hammer breech) or anything... any variation...

Just so long as they're nelson based.

Any known fits?

[pizzadude]

Nelson Pumps