Paintball

[druid]

Note to the Mods: If you can use any of this information elsewhere, feel free to copy it over. If this needs to be moved, well, you are the Mods...lol.

As you can see, Kingman Spyders use primarily Metric screw sizes. As you can see, I have not yet compiled a list for a few markers. I will get to them, I promise.

NOTATIONS:
W/W means "with washer"
"NA" means (information) "Not Available"
VA means "Vertical Adapter"
ASA means "Air Source Adapter"


Aggressor

Feed neck mounting screws - M4x8 w/w

Detent mounting screw - M4x6

VA mounting screw - M5x14 w/w

Frame mount screw - M6x12.5

beavertail screwr - M4x6

Bottomline ASA mount screws - 5/32"x7/8" w/w

Drop to frame - 5/32"x5/8" w/w



Aggressor XT - (same as agressor)



AMG

Shroud screw - M4x4

Feed neck mounting screws - M4x8 w/w

Detent mounting screw - M4x6

VA body screw (side) - M5x12 w/w

Frame mount screw - M5x12 w/w

Reg ASA-to-drop mount screws - 5/32"x7/8" w/w

drop to grip - M5x12 w/w

On/Off switch mount screw - M2x3



AMG LCD - same as AMG



Compact 2 in 1

Feed neck mounting screws -

Detent plate mounting screw - M4x6

VA mounting screw - M5x14 w/w

Frame mount screw - M5x12.5

Sight rail screw w/ washer - M4x8 w/w

Bottomline ASA mount screws - 5/32"x7/8" w/w

s/s line adapter - M8xM8, male/male



Compact Deluxe

Detent mounting screw - M4x6

VA mounting screw - M5x12.5

Frame mount screw - M5x12 w/w

Sight rail screw w/ washer - M4x8



E99

Feed neck mounting screws - M4x8 w/w

Detent mounting screw - M4x6

VA mounting screw - M5x14 w/w

Frame mount screw - M5x12 w/w

Beavertail rail screw w/ washer - M4x8

Frame-to-drop screws - 5/32"x5/8" w/w

Drop-to-ASA mount screws - 5/32"x7/8" w/w

On/Off switch mount screw - M2x6

Coil set screw (solonoid) - 1/8"



E99 Avant

Detent mounting screw - M4x6

VA mounting screw - M5x14 w/w

Frame mount screw - M5x12w/w

Beavertail rail screw w/ washer - M4x6

Drop-to-frame screw - 5/32"x5/8" w/w

Bottomline ASA to drop - 5/32"x7/8" w/w

On/Off switch mount screw - M2x6



Electra

Detent mounting screw - M4x6

VA mounting screw - M5x14 w/w

Frame mount screw - M5x12

Drop-to-frame screw - 5/32"x58" w/w

Bottomline ASA-to-drop screws - 5/32"x7/8" w/w

On/Off switch mount screw - M2x6



Electra DX (same as electra...only difference is regulator)



EM1

Feed neck mounting screws - M4x6 w/w

Frame mount screw - M3.5x12 w/w

Bottomline Reg ASA mount - 5/32"x7/8" w/w

On/Off switch mount screw - M2x6



Esprit

Feed neck mounting screws - M4x8 w/w

Detent mounting screw - M4x6

VA mounting screw - M5x14 w/w

Frame mount screw - M5x12 w/w

Sight rail screw w/ washer - M4x12 w/w

Bottomline ASA mount screws - 5/32"x5/8" w/w

On/Off switch mount screw - M2x6

Coil set screw (solonoid) - 1/8"



Fenix

Feed neck mounting screws - M4X6

Detent mounting screw - NOT specified

VA mounting screw - M5X12

Frame mount screw - M5X12

Drop-to-frame screw - 5/32"x5/8" W/W

ASA-to-drop screws - 5/32"x7/8"W/W

On/Off switch mount screw - M2X6



Flash

Feed neck mounting screws - M4X6

Detent mounting screw - M4X6

VA mounting screw - M4X14 W/W

Frame mount screw - M5X12 W/W

Beavertail screw - M4X8 W/W

Cocking Rod-tobolt screw - M4x8 W/W

Drop-toFrame screw - 5/32"x5/8" w/w

ASA-to-drop screws - 5/32"x7/8" w/w

On/Off switch mount screw - M2x6

Coil set screw (solonoid) - 1/8"

S/S-to-ASA adapter fitting - M8xM8, Male/Male



Flash LCD

Feed neck mounting screws - M4X6

Detent mounting screw - M4X6

VA mounting screw - M4X14W/W

Frame mount screw - M5X12 W/W

Beavertail screw w/ washer -M4X8 W/W

Cocking rod-to-bolt screw - M4X8 W/W

Drop-to-frame screw - 5/32"X5/8" W/W

ASA-to-Drop screw - 5/32"X7/8"W/W

On/Off switch mount screw - M2X6

Coil set screw (solonoid) - 1/8"

S/S-to-ASA adapter fitting - M8XM8, Male/Male



Pre 05 Imagine

Feed neck mounting screws - M4x6

Detent mounting screw - M4x8

VA mounting screw - M5x12.5 w/ washer

Frame mount screw - M5x12

Sight rail screw w/ washer - M4x12

Bottomline ASA mount screws - 5/32"x7/8" screw with washer

On/Off switch mount screw - M2x6

Coil set screw (solonoid) - 1/8"



05 Imagine

Feed neck mounting screw - not specified

Detent mounting screw -

VA mounting screw - M5x14 w/ washer

Frame mounting screw - M5x12 w/ washer

Sight rail mounting screw -

Bottomline ASA mount screw - 5/32"x7/8" with washer

On/Off switch mount screw - M2x6

Coil set screw - not specified



MR1 (semi)

Feed neck mounting screws - M4x8

Detent mounting screw - NA

VA mounting screw - NA

Frame mount screw - M5x12

Bottomline ASA mount screws - NA

Coil set screw (solonoid) - NA



MR2 (electric)

Feed neck mounting screws - M4x8

Detent mounting screw - NA

Foregrip mounting screw - M5x12

Frame mount screw - M5x12

Carry Handle - M4x12

Grip Panel screws - M4x8

Drop-to-frame screw - M5x12

Rail ASA-to-Rai/drop - NA

Coil set screw (solonoid) - NA



MR3 - Electric (Rocking Trigger) Body screws the same as MR2



Pilot

Feed neck mounting screws - M4X6

Detent mounting screw - M4X6

VA mounting screw - M5X14W/W

Frame mount screw - M5X12

Drop-to-Frame screw - 5/32"x5/8" W/W

ASA-to-Drop screws - 5/32"x7/8" W/W

On/Off switch mount screw - M2X6

Grip panel screws - M3X10



Rodeo

Feed neck mounting screws - M4X6

Detent mounting screw - M4X6

VA mounting screw - M5X14W/W

Frame mount screw - M5X12

Bolt screw - M4X8

Grip panel screw - M3X10

Drop-to-Frame screw - 5/32"x5/8" W/W

ASA-to-drop screws - 5/32"x7/8" W/W



Shutter

Feed neck mounting screws - M4X6

Detent mounting screw - M4X6

VA mounting screw - M5X14W/W

Frame mount screw - M5X12

Regulator screw - M4x5

Grip cover screw - M3X10

Drop-to-Frame screw - 5/32"X5/8"W/W

ASA-to-Drop screws - 5/32"X 7/8" W/W

Shroud Screw - M4X4



Pre 05 Sonix

detent cover screws - M4x6

VA mounting screw - M5x14 w/ washer

grip frame screw - M5x12.5

sight rail attachment - M4x8 w/ washer

duckbill-to-frame screw - 5/32"x7/8" screw with washer



05 Sonix



Sport

Detent mounting screw - M4X6

VA mounting screw - M5X16W/W

Frame mount screw - M5X20

Sight rail screw w/ washer -

Drop-to-frame screw - 5/32"x5/8" W/W

ASA-to-drop screws - 5/32"X7/8" W/W



TL Plus

Detent mounting screw - M4X6

VA mounting screw - M5X14W/W

Frame mount screw - M5X12

Beavertail screw - M4X6

Bottomline ASA screws - 5/32"X7/8" W/W

Shroud Screw - M4X4



TL-X

Feed neck mounting screws - M4X6

Detent mounting screw - M4X6

VA mounting screw - M5X14 W/W

Frame mount screw - M5X12 W/W

Bolt screw - M4X8

Drop-to-frame screw - 5/32"X5/8" W/W

ASA-to-drop screws - 5/32"X5/8" W/W

Grip cover screw . M3X10



Victor

Feed neck mounting screws - NA

Detent mounting screw - M4X6

VA mounting screw - M5X14 W/W

Frame mount screw - M5X12.5

Sight rail screw w/ washer - NA

Drop-to-frame screw - 5/32"X5/8" W/W

ASA=to-drop screws - 5/32"X7/8" W/W



Victor II (Same as Victor)


VS Series


Pre 05 Xtra

Feed neck mounting screws - M5x14 w/ washer

Detent cover mounting screw - M4x6 w/ washer

Vertical feed neck screw - M4x6

VA mounting screw - M5x14 w/ washer

Frame mounting screw - M5x12 w/ washer

Beavertail mounting screw - M4x6 w/ washer

Bottomline ASA mount screw -

Cocking rod-to-bolt attachment screw - M4x8 w/ washer

Grip cover screw - M3x10

Drop forward grip screw - 5/32"x5/8" w/ washer

ASA-to-drop forward screw - 5/32"x7/8" w/ washer



05 Xtra



_________________________________________________

Standard ASA/tank reg threads are - 3/4" x 14 NPT thread

Spyder barrels threads are - Metric 1.5

Standard gauge threads are 1/8"NPT
__________________________________________________ __

Standard Macroline fittings...both 90* and straight are 1/8"NPT
__________________________________________________ ___

To convert Spyder S/S lines to Standard threading so you can put aftermarket (SAE) products on a Spyder, you need a Metric Female to Standard Male nut adapter.
__________________________________________________ ___

CLICK ME for a PRINTABLE THREAD GAUGES AND SCREW SIZE TOOL!!!

__________________________________________________ ______________

The following barrel-thread listing was provided by Chubb0rz. Thanks man! (I added a few too)


Angel - LED to 05 Speed use "old threads" g7/06 speed/gat use New angel threads

Autocockers - Cocker Threaded

DMs/PMs - Cocker Threaded

Egos - Cocker Threaded

Ion/Impulse - Impulse Threaded

Phantom - CCI Threads

Shocker - Shocker Threaded

Timmys - Cocker Threaded

Traccer - ACI Traccer Threaded

Freestyle - Cocker Threaded

Promaster - Cocker Threaded

Wrath - Cocker Threaded

Spyder/MR/TES/T1/VS Series - Spyder Threaded

Tippmann - 98 and A5 threaded

Cyborgs - Cocker Threaded

Defiant Cocker Threaded

Mags - Automag Threaded

Bko/B2k - I think 03's are ICD threaded and 04's are Cocker threaded

[Railgun]

That's a very nice start but I noticed that the thread pitches are not included with any of the sizes. Just the diameter x length. So there's still room for error if the person is faced with multiple pitches.

EDIT- You can see what I mean by this combined set of coarse and fine metric sizes.

http://www.rctek.com/fixings/info_fi...ric_chart.html