Millenium Spyder Thread

darkspidie1984 · 08-17-2009, 11:03 AM

Recently I have received questions via pm in here and other paintball websites reference Millenium builds. Since MIlleniums are spyders, but considered by some to be a subgenre of spyder I thought I could start a thread specific to them here. Anyone looking for milly specfic info should look and ask questions here. Will also include pictures/builds recently displayed by others here, for the comparison of the would be milly builders interests.

Darkspidie1984's Milly

14" Spyder threaded Freak barrel
Alamo City paintball Del Flo bolt (two oring type)
Alamo City paintball Delrin Fatty Striker (with oring)
Custom Products green Cocker Detent
AKA Tornado valve
AKA Clamping feedneck
Bob Long Single trigger frame
Spyder black single trigger
Lapco Vertical adaptor
Bob Long Torpedo Regulator
CP Direct mount On/Off
Black macroline fittings

StupidDogg's Milly

A custom earth magnetic release open face bolt (think jam bolt, but lighter and easier resetting)
custom alluminum pull pin
upper and lower strippable tubes in seconds
Enlarged ASA
Polished fatty Pirahna hammer
Railgun's high flow valve
Railgun custom set screw clamping feedneck
Railgun aluminum velocity adjusting rings
Railgun delrin removable bottom tube plug with adjuster
Cocker delrin ball detent
PPS stab
BL single trigger frame

t3rd Hugg3r's milly

BL Millennium Body
• BL Single Trigger
• Hogue Palm Swells Grips
• PMI Bike Grip
• Lapco VA Adapter
• Lapco Drop Forward
• Lapco Offset Sight Mount
• Palmers Female Regulator
• Air-thru T-Stock
• Braided Hose with Quick Disconnect
• Maddmann Rocket Valve
• CP 2-Piece Barrel
• Polished Striker and Bolt

Cougar20th's milly

Milling done by G3PB
Ano done by Ano Tech
Booyaah Frame
Shockteck bolt.
Messiha Reg.
Rebline Bullet barrel and Bullet LPC?? Might be silverbullet parts
NW Cocking slot cover
Centerflag guage
CP razor dropforward (this gets swapped between guns)
Unknown feedneck (custom milled??)

darkspidie1984 · 08-17-2009, 11:06 AM

Commonly asked questions about milleniums:
What threaded barrels do they use?
Spyder threaded

What feedneck threads do they use?
Well there are two types of Milly bodies. Some were threaded with Busmaster/Defiant threads and some were press fit. another note: Some people will try to tell you angel feednecks fit. they are close in thread type but different and can strip out leaving you with a damaged body.

How do I know If my milly is pressfit or threaded?
If the body had a press fit, the diameter changes of the bottom of the fat portion of the feedneck are 90 degree angles. Instead of rounded like the millys pictured above.

The black bodies are press fit the purple and silver bodies are threaded

What kind of striker does the millenium use?
Fatty style striker. Alamo city paintball still makes fatty style strikers.

Which kind of bolt should I use?
Standard spyder bolts from 06 and earlier (before the vs line) work fine. There were a few different style milly bodies. Some were top and rear cocking and some could be top, rear and side cocking (cocking pin on side of body attached to striker).

How do I know if my Millenium is Full bodied or the compact body?
On the fullbodied millenium the LPC screws right into the front of the body. Also fullbodied millenium bodies require either and asa adaptor or air line screwed directly into the underside of the body. Compact style millenium bodies accept a asa front block that just plugs into the front of the body and is held in place by a screw. See the pics in above post. The green splash milly is full bodied and the red to black fade one is compact style bodied.

Will an Eframe electonic trigger frame fit on my millenium?
THis depends on the individual frame. Due to the square shaped bottom and cut of the channel on the underside of the Millenium body, many frames wont sit flush with the body. Which will cause issues firing the gun, including getting the sear to contact the striker. Some older eframes fit fine others will need some modification to fit well enough to properly fire the marker.

What detents do millys use?
They use Cocker ball detents.

What ASA/VA fit the full size millenium bodies?
Full size milly cant use front block VAs only the lpc. Older spyder/ pre VS spyder asa/va front blocks fit on the compact body Millys.

What colors schemes did milleniums have?
Milleniums came in solid black. But also in black/blue, black/red, black/silver, black/purple, and black/green splash anos.

More to come.

stupiddogg · 08-21-2009, 09:39 PM

Very nice, caught me by surprise as I was scrolling down....

"Hey that looks like mine!" lol

darkspidie1984 · 08-25-2009, 09:49 AM

updated the second post let me know if you guys have anything to add.

Railgun · 09-04-2009, 02:25 AM

Give me a few days to get pics of my own to add to the list. It's basically the same as Stupiddogg's (well DUH!) but it's red and runs on direct pressure.

cougar20th · 09-04-2009, 07:36 AM

Below is a link to my spyders. The picture shows a mix of VLM, FBM & Milleniums Shown in the picture are 5 of my 6 Milleniums. One is missing a purple/black millenium.

Labels of what gun is what are in the text under the picture.
My Custom Spyders - MCB Gallery

Adrenaline_Junkie · 09-07-2009, 06:02 PM

What ASA/VA fit the full size millenium bodies?

skinnyfatguy · 09-08-2009, 01:23 AM

A couple of pics of mine.

t3rd_hugg3r · 09-08-2009, 08:17 PM

^^^Awesome guns man! Pming you about the akalmp compact lpc.

Hewett · 04-20-2011, 08:38 PM

what kind of ball detente do they use?

08-17-2009, 11:03 AM	#1 (permalink)
darkspidie1984 Active Member Join Date: Nov 2008 Location: jupiter, florida	Millenium Spyder Thread Recently I have received questions via pm in here and other paintball websites reference Millenium builds. Since MIlleniums are spyders, but considered by some to be a subgenre of spyder I thought I could start a thread specific to them here. Anyone looking for milly specfic info should look and ask questions here. Will also include pictures/builds recently displayed by others here, for the comparison of the would be milly builders interests. Darkspidie1984's Milly 14" Spyder threaded Freak barrel Alamo City paintball Del Flo bolt (two oring type) Alamo City paintball Delrin Fatty Striker (with oring) Custom Products green Cocker Detent AKA Tornado valve AKA Clamping feedneck Bob Long Single trigger frame Spyder black single trigger Lapco Vertical adaptor Bob Long Torpedo Regulator CP Direct mount On/Off Black macroline fittings StupidDogg's Milly A custom earth magnetic release open face bolt (think jam bolt, but lighter and easier resetting) custom alluminum pull pin upper and lower strippable tubes in seconds Enlarged ASA Polished fatty Pirahna hammer Railgun's high flow valve Railgun custom set screw clamping feedneck Railgun aluminum velocity adjusting rings Railgun delrin removable bottom tube plug with adjuster Cocker delrin ball detent PPS stab BL single trigger frame t3rd Hugg3r's milly BL Millennium Body • BL Single Trigger • Hogue Palm Swells Grips • PMI Bike Grip • Lapco VA Adapter • Lapco Drop Forward • Lapco Offset Sight Mount • Palmers Female Regulator • Air-thru T-Stock • Braided Hose with Quick Disconnect • Maddmann Rocket Valve • CP 2-Piece Barrel • Polished Striker and Bolt Cougar20th's milly Milling done by G3PB Ano done by Ano Tech Booyaah Frame Shockteck bolt. Messiha Reg. Rebline Bullet barrel and Bullet LPC?? Might be silverbullet parts NW Cocking slot cover Centerflag guage CP razor dropforward (this gets swapped between guns) Unknown feedneck (custom milled??) __________________ my feedback: http://www.pbnation.com/feedback.php?&u=109408 http://www.mcarterbrown.com/forums/f...tml#post845453

08-17-2009, 11:06 AM	#2 (permalink)
darkspidie1984 Active Member Join Date: Nov 2008 Location: jupiter, florida	Commonly asked questions about milleniums: What threaded barrels do they use? Spyder threaded What feedneck threads do they use? Well there are two types of Milly bodies. Some were threaded with Busmaster/Defiant threads and some were press fit. another note: Some people will try to tell you angel feednecks fit. they are close in thread type but different and can strip out leaving you with a damaged body. How do I know If my milly is pressfit or threaded? If the body had a press fit, the diameter changes of the bottom of the fat portion of the feedneck are 90 degree angles. Instead of rounded like the millys pictured above. The black bodies are press fit the purple and silver bodies are threaded What kind of striker does the millenium use? Fatty style striker. Alamo city paintball still makes fatty style strikers. Which kind of bolt should I use? Standard spyder bolts from 06 and earlier (before the vs line) work fine. There were a few different style milly bodies. Some were top and rear cocking and some could be top, rear and side cocking (cocking pin on side of body attached to striker). How do I know if my Millenium is Full bodied or the compact body? On the fullbodied millenium the LPC screws right into the front of the body. Also fullbodied millenium bodies require either and asa adaptor or air line screwed directly into the underside of the body. Compact style millenium bodies accept a asa front block that just plugs into the front of the body and is held in place by a screw. See the pics in above post. The green splash milly is full bodied and the red to black fade one is compact style bodied. Will an Eframe electonic trigger frame fit on my millenium? THis depends on the individual frame. Due to the square shaped bottom and cut of the channel on the underside of the Millenium body, many frames wont sit flush with the body. Which will cause issues firing the gun, including getting the sear to contact the striker. Some older eframes fit fine others will need some modification to fit well enough to properly fire the marker. What detents do millys use? They use Cocker ball detents. What ASA/VA fit the full size millenium bodies? Full size milly cant use front block VAs only the lpc. Older spyder/ pre VS spyder asa/va front blocks fit on the compact body Millys. What colors schemes did milleniums have? Milleniums came in solid black. But also in black/blue, black/red, black/silver, black/purple, and black/green splash anos. More to come. __________________ my feedback: http://www.pbnation.com/feedback.php?&u=109408 http://www.mcarterbrown.com/forums/f...tml#post845453 Last edited by darkspidie1984; 04-18-2012 at 10:54 AM.

08-21-2009, 09:39 PM	#3 (permalink)
stupiddogg MCB Member Join Date: Nov 2006 Location: Sacramento	Very nice, caught me by surprise as I was scrolling down.... "Hey that looks like mine!" lol __________________ SACPB Feedback MCB Feedback PBN FeedBack AO FEEDBACK FOGDOC

08-25-2009, 09:49 AM	#4 (permalink)
darkspidie1984 Active Member Join Date: Nov 2008 Location: jupiter, florida	updated the second post let me know if you guys have anything to add. __________________ my feedback: http://www.pbnation.com/feedback.php?&u=109408 http://www.mcarterbrown.com/forums/f...tml#post845453

09-04-2009, 02:25 AM	#5 (permalink)
Railgun Post Whore Join Date: Oct 2006	Give me a few days to get pics of my own to add to the list. It's basically the same as Stupiddogg's (well DUH!) but it's red and runs on direct pressure. __________________ I had a "Paintball God" moment once. Like Al Bundy's Polk High football moment I live on for the slim chance of repeating that one time miracle in some small way.........

09-04-2009, 07:36 AM	#6 (permalink)
cougar20th Post Whore Join Date: Apr 2006 Location: Amherst NH	Below is a link to my spyders. The picture shows a mix of VLM, FBM & Milleniums Shown in the picture are 5 of my 6 Milleniums. One is missing a purple/black millenium. Labels of what gun is what are in the text under the picture. My Custom Spyders - MCB Gallery

09-07-2009, 06:02 PM	#7 (permalink)
Adrenaline_Junkie Newbie Join Date: Sep 2009	What ASA/VA fit the full size millenium bodies?

09-08-2009, 01:23 AM	#8 (permalink)
skinnyfatguy Active Member Join Date: Jul 2006 Location: Denver, CO	A couple of pics of mine.

09-08-2009, 08:17 PM	#9 (permalink)
t3rd_hugg3r Seasoned Member Join Date: May 2007 Location: Mt. Vernon, IL	^^^Awesome guns man! Pming you about the akalmp compact lpc. __________________ Taking up Room Sale! MCB Feedback \| PBNation Feedback \| Custom Cocker Feedback Need a logo designed? Maybe I can help.

04-20-2011, 08:38 PM	#10 (permalink)
Hewett Rec Poster Join Date: Dec 2010	what kind of ball detente do they use? __________________ Riverside Regiment- Buffalo NY

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search