mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   KPCS Customs (http://www.mcarterbrown.com/forums/kpcs-customs/)
-   -   Good week & Bad week ...... (http://www.mcarterbrown.com/forums/kpcs-customs/223968-good-week-bad-week.html)

KPCS 01-19-2013 07:31 PM

Good week & Bad week ......
 
Last week was a bad week.
A customer bought a Ma-Deuce-A II body some time ago.
He sent it bad to me to do the Ripetied milling on it.
Now I have only did Ripetied milling on one Ma-Deuce-A before and it was a long time ago.
So when I was doing the milling, I milled through the bolt air passage. :censored::bang::censored:
Now I had to weld up the area. :censored::bang::censored:
The hard part was I had to PM the customer about this. :bang:

The welded body..
http://imageshack.us/a/img836/7374/p1100002yt.jpghttp://imageshack.us/a/img525/1253/p1100003m.jpg

After the welding I put it back in the mill to finish up the milling.
It cleaned up better then I thought it would.
http://imageshack.us/a/img690/649/p1100004b.jpghttp://imageshack.us/a/img138/5377/p1100005w.jpg

http://i1322.photobucket.com/albums/...pse296dcce.jpghttp://i1322.photobucket.com/albums/...ps46e1a955.jpg

This week was a Good week.
Took a brake from the Ma-Deuce-A II for a few days so I went in the shop to work on a idea I had.
I have a few raw bodys in the shop so I started with that.
http://i1322.photobucket.com/albums/...ps52d7aa40.jpg
http://i1322.photobucket.com/albums/...ps80ed0746.jpg

Now the one thing that bugged me was dual pump rods that just work to do the same thing.
So I thought let use each rod to do different things.
One rod to work the bolt and the other rod to work the hammer.

The bolt.
http://i1322.photobucket.com/albums/...ps9ff490f8.jpg

The Hammer.
http://i1322.photobucket.com/albums/...ps6089e1d3.jpg

The body look like this.
http://i1322.photobucket.com/albums/...psaa56b0e7.jpghttp://i1322.photobucket.com/albums/...ps1d41d62c.jpg

Add the air source
http://i1322.photobucket.com/albums/...psfa573522.jpg

Got to make a pump handle for it .
http://i1322.photobucket.com/albums/...ps85f94d0b.jpg

Now got to trial fit everything to make sure it works right.
http://i1322.photobucket.com/albums/...ps79c854e8.jpg
http://i1322.photobucket.com/albums/...psfcb4c6f7.jpg
http://i1322.photobucket.com/albums/...psf6a58229.jpg

I hope you enjoy the pic's and that. I hope next week is better yet.

Ken W

senghing27 01-20-2013 12:09 AM

I think it looks great Ken.
Glad things turned out better, I mean it could have been ten times worse.

dundadun 01-20-2013 01:39 AM

Nice save!

ChiKo 01-20-2013 10:25 AM

I buy !! ^^

Nice job !

KPCS 01-20-2013 10:37 AM

Quote:

Originally Posted by ChiKo (Post 2598581)
I buy !! ^^

Nice job !

It's not done yet but it will be for sale soon.

Ken W

TheePsycho 01-20-2013 12:30 PM

The bad thing about that weld is it will show discoloring if it is anodized.

ChiKo 01-20-2013 12:34 PM

Quote:

Originally Posted by KPCS (Post 2598589)
It's not done yet but it will be for sale soon.

Ken W

Ok let me know ;)

KPCS 01-20-2013 12:45 PM

Quote:

Originally Posted by TheePsycho (Post 2598694)
The bad thing about that weld is it will show discoloring if it is anodized.

Not that bad in a dust finish though.
Not in powder coating.

Ken W

Jebus 01-20-2013 01:06 PM

From bad to great! Looks pretty darn nifty Ken!!

weekendballer 01-22-2013 02:04 PM

So is that a 1/4 blocked?


All times are GMT -4. The time now is 03:03 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC