| ||Thread Tools||Search this Thread|
|01-29-2013, 05:53 PM||#1 (permalink)|
I made a pump like the Scout but with out the back block.
Still has dual pump rods but can adjusted bolt and hammer individual.
Custom Delrin Bolt.
Custom Stainless Steel Hammer.
Still has the 12 gram drop out in the pump handle.
Custom Delrin Pump Handle.
RH stock class with a 10 round feed tube.
I took a stock barrel and drilled it like a J&J whisper.
1 1/2 hing frame.
Powder coated in a Cobalt Blue with a light coat of a Indigo Clear.
KPCS pump F/S
I'm just a glorified drill press operator.
I have come here to chew bubblegum & kick @$$ and I'm all out of bubblegum ......
Last edited by KPCS; 01-30-2013 at 07:20 PM.
|01-30-2013, 11:20 AM||#4 (permalink)|
Elven Pump SDM/DM
Join Date: Oct 2008
tell us more about the porting (assuming that is what i'm seeing) on the underside of the barrel. Why not all the way around?
"Certainly there is no hunting like the hunting of man and those who have hunted armed men long enough and liked it, never really care for anything else thereafter." Ernest Hemingway, "On the Blue Water," Esquire, April 1936
In the world I see - you are stalking elk through the damp canyon forests around the ruins of Rockefeller Center. You'll wear leather clothes that will last you the rest of your life. You'll climb the wrist-thick kudzu vines that wrap the Sears Tower. And when you look down, you'll see tiny figures pounding corn, laying strips of venison on the empty car pool lane of some abandoned superhighway.
Visit my Etsy store:
|01-31-2013, 08:47 PM||#5 (permalink)|
In theory the porting on the bottom in mid barrel is to put a back spin on the ball ( in theory ). J&J did this years ago called it the Whisper I think ...
|05-06-2013, 10:43 PM||#6 (permalink)|
very sweet pump, got to see it the other day and was really impressed.
Ready to form Voltron!! Activate interlock, dynotherms connected, infracells up, mega thrusters are go!! Lets go Voltron Force!!
|Thread Tools||Search this Thread|