SmartParts EOS!

TheAznInvazn · 02-05-2008, 09:19 PM

Full review is on the Nation!

Phantom Flanker · 02-05-2008, 10:36 PM

good review.

from your review this looks like this is what the ion should have been.

Clearush · 02-06-2008, 08:52 AM

kind've looks like something dye would make.

russc · 02-06-2008, 12:19 PM

Good review, although I would have liked to see the board. Is it the same exposed solenoid coil that they are using for the Ion, or have they gone to a manifold style?

nhmercracer · 02-06-2008, 01:03 PM

Uses the Epiphany board.

insixdays777 · 02-06-2008, 05:17 PM

I have been secretly wanting one of these....must resist the dark side...No SP you are not my father!...

TheAznInvazn · 02-06-2008, 10:55 PM

The same type of setup, the solinoid is on the board, like the ion, but it can handle higher pressures.

I actually have one problem with my EOS...

I can't seem to get the board out... it's kinda stuck :P

Murph · 02-06-2008, 10:56 PM

loosen the grip screws on the other side of the body, sometimes they dig into the board if they're too tight.

TheAznInvazn · 02-07-2008, 11:16 AM

Ive tried completely taking off the grips, and it's still stuck. I'll think of something eventually...

I dont really need to take the board out either. I'll fid a way to remidy the problem if I ever get a new board 9which I probably wont, 17 bps is quite enough).

sdawg · 02-07-2008, 02:20 PM

I was about to ask why you need to remove the board? Next time you're at Krossfire, just ask Jarrel or Andrew to look at it.

02-05-2008, 09:19 PM	#1 (permalink)
TheAznInvazn Active Member Join Date: Feb 2008 Location: SA Town, Texas Posts: 140	SmartParts EOS! Full review is on the Nation!

02-06-2008, 08:52 AM	#3 (permalink)
Clearush MCB Member Join Date: Mar 2006 Location: HTown, TX Posts: 1,457	kind've looks like something dye would make. __________________ Carter's Commando Texas division The White Board Comic My SCP Feedback Ebay Feedback MCB Feedback

02-06-2008, 12:19 PM	#4 (permalink)
russc Newbie Join Date: Apr 2006 Location: Vancouver, BC Posts: 4,061	Good review, although I would have liked to see the board. Is it the same exposed solenoid coil that they are using for the Ion, or have they gone to a manifold style? __________________ Nelson Owner's Group / Raincouver! / My Gallery / My Feedback / Blackleaf Outfitters -Russ

02-06-2008, 01:03 PM	#5 (permalink)
nhmercracer Benz Join Date: Mar 2007 Location: Haverhill, MA Posts: 327	Uses the Epiphany board. __________________ It is what it is.... M.W. My MCB Feedback

02-07-2008, 02:20 PM	#10 (permalink)
sdawg MCB Member Join Date: Dec 2006 Location: Texas Posts: 1,408	I was about to ask why you need to remove the board? Next time you're at Krossfire, just ask Jarrel or Andrew to look at it. __________________ Everybody: Let's ease up on the red loctite, 'kay? Thanks. Feedback

02-05-2008, 10:36 PM	#2 (permalink)
Phantom Flanker Active Member Join Date: Apr 2007 Location: Peterborough, NH Posts: 233	good review. from your review this looks like this is what the ion should have been.

02-06-2008, 05:17 PM	#6 (permalink)
insixdays777 Rec Poster Join Date: Mar 2007 Posts: 85	I have been secretly wanting one of these....must resist the dark side...No SP you are not my father!...

02-06-2008, 10:55 PM	#7 (permalink)
TheAznInvazn Active Member Join Date: Feb 2008 Location: SA Town, Texas Posts: 140	The same type of setup, the solinoid is on the board, like the ion, but it can handle higher pressures. I actually have one problem with my EOS... I can't seem to get the board out... it's kinda stuck :P

02-07-2008, 11:16 AM	#9 (permalink)
TheAznInvazn Active Member Join Date: Feb 2008 Location: SA Town, Texas Posts: 140	Ive tried completely taking off the grips, and it's still stuck. I'll think of something eventually... I dont really need to take the board out either. I'll fid a way to remidy the problem if I ever get a new board 9which I probably wont, 17 bps is quite enough).

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search