Dye Carbon Fiber Boomstick
So today I got my new Dye CF Boomstick, was eager to see this design up close. I have not shot it yet, this is just inspection of the barrel.
EDIT: NOW WITH MORE PICS
Package: To start off it comes in a stylish designed box. Made of cardboard but with high gloss design print. My first thought was little over the top, then I remembered this costs 150 greens. Inside the barrel is split into 2 pieces front and back, they sit VERY snuggly in a dense rubber cutout. There was no way these were going to shift or become damaged, VERY well secured and protected. One of first things I noted was a "Made in Taiwan" sticker on the box, I know some people will find that discouraging.
Tip: The tip is aluminum and has same porting design as all other Dye tips. This barrel tip has one slight change, the tip is milled down at very end of the tip similar to Proto barrels. My guess is to make this barrel more exclusive cause there is no way you can tell the weight difference. I personally HATE Proto tips, I call them penis barrels. This tip is not as bad as Proto tips though, it has less of an angle to it so its flatter and it also still has the grooves milled.
Back: The back has 3 materials being used from what I can tell.
First is the carbon fiber protection sleeve around the middle of the back.
Second is the SS insert, which is a simple single sleeve about as thick as your finger nail. It looks like a simple straight tube from the inside and runs whole length that a paintball will travel.
Third is aluminum which looks like it runs the whole length of barrel back. I am not sure without taking whole thing apart destroying it in the process. The entire back threaded area is aluminum for sure. I believe aluminum runs through middle of barrel, holding the SS and CF, and comes all way out with aluminum threading at front.
If you inspect one close you can see the SS sleeve ending both front and back and is not connected to any part of the threaded area material where it ends. The Dye logo that looks like a long tear drop appears to be SS, and is most likely what holds SS in place. The SS insert is also colored black somehow. It does not appear to be powder coated, not sure what it is.
Problems: I found one problem very quickly, the Dye logo on one side sticks out more than on the other side. Guns like cockers/mags/AKA that have areas under where barrel screws in might have some trouble. I could not screw it onto my works cocker because the logo was scrapping that area, I also had very tight fit with my Exile mag body lip scrapping it. Now the logo that is more sunk in fits fine, but the problem with that one is the edge of CF is exposed, leaving the only sign of potential I could find on the barrel for CF to be damaged or unwoven. A tighter quality control would fix this problem, but you can not identify it until a barrel is completed, and no company would scrap a barrel completed. The good news is this does not effect most modern guns like DM/Luxe/Shocker, Egos might have a problem though.
Overall: The barrel weight is about same as ultralight, maybe even a tad lighter. This was only from holding it in my hands. The barrel also balances in the middle. The control bore is indeed about 1 inch longer than other Dye bores, this makes 14 inch tips feel like 16 inch. I did a few blow through tests, compared to another .688 UL, the CF was easier to blow paint through than the UL. The finish on the inside is the best finish I have felt on a barrel. It felt like touching liquid when I put my finger inside. I have about 50 barrels, and I feel this one has best interior finish I have felt and seen so far, and it is smoother than older SS boomstick I have which is still like new.
Score: I give this a 6/10. -1 for the price. -3 for the logo problem, buying a barrel and not being able to screw it onto a gun with same threading is inexcusable. Note this score is not for how it shoots, but overall product and finish.
I could not help but laugh at old heavy brick matrix with a CF barrel on it
Nice review . Do you think that logo will eventually fall off ? And do you think the part where the carbon is showing will get worse just by examining it ? One more question . Do you think it was worth the 150 price tag ? Sorry for the question s , just wanted to know because I was very interested in picking one up to try it . Thank you m.
No this logo will never fall off, its part of one of the metal inserts. They do not want you ever taking the back inserts apart. I can see the edge of carbon by the logo possibly getting damaged over time, but its near back of barrel which almost never gets roughed up. Side where logo sticks out does not have any carbon edge exposed. Mine could be a slightly defective one and its very early in their production runs. If you go to a store it might be smart to look at several.
Aside from the logo issue, I do feel it is worth the 150. I would rather pay 130 personally, but they did put alot of design process into it, much more than your average barrel. Keep in mind 3 materials were used and this clearly is targeted as a luxury best of best barrel.
Let us know how it goes after you put paint through it.
Kool man thanks for the response . Yes please give us an update after you shot some paint thru it .
Pics or shens! :p
You guys are hard to please
14 inch old boomstick and 14 inch ultralite
Old tip on left, new tip on right
Barrel back lengths
CF with 12 inch tip, compared to 2 14 and 1 12
Exposed CF sunken logo
Left side is the logo that sticks out some and causes problems
The underside lip on some guns Im talking about
I just wanted to use this emicon
Solid pictures! So the back is far longer than any other Dye back produced. That's pretty wonky.
|All times are GMT -4. The time now is 03:42 PM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC