For Sale: M14 Rifle Mag!

kenjay · 03-02-2010, 09:07 PM

Hey everyone,

Have a beautiful M14 Rifle replica paintball marker for sale. Some of you will recognize this marker. Sold by Rap4 and was made by Extreme Sports & Hobbies.

The marker is built around the classic Automag platform and uses a Smart Parts All-American barrel. Has a classic valve, classic rail, classic sight rail, and classic right-side feed body. The best part about this rifle, is that it's made with REAL military issued parts. The stock, barrel ferrule, steel 20 round magazine, shoulder sling, and rear sight elevation and windage knobs are all original U.S.G.I. M14 parts. The receiver is cast from the back half a real M14 receiver, because most (if not all?) of the real M14 receivers were cut up by the government before scrapping them.

The stock is a fiberglass stock which was used during the war over in Vietnam. They stopped using the wood stocks because the humidity in the Jungle was causing them to swell.

As you can see, the finishing on the butt plate and sling hardware is showing its age (30+ yrs) and the barrel is a little dinged up towards the tip. The valve has a quick-disconnect nipple installed for direct attachment of a remote air line. Fired her the other day, and of course still shooting great.

Price: $395 paypal'ed and shipped

Might, just might, be interested in partial trades. Cash must be involved. But mainly just looking for cash right now.

Here's the pictures, enjoy! Click on the pics to view a larger size.

If you are interested, please post here and/or send me a PM.

Have all positive feedback over on AO and PbN under the same username if that needs to be seen.

Thanks!
Ken

kenjay · 03-16-2010, 09:45 PM

Still available for sale!

kenjay · 04-26-2010, 07:12 PM

Anyone interested? Price was reduced to sell..$550 paypal'ed and shipped.

kenjay · 04-29-2010, 07:01 PM

Priced to sell. Buy buy buy!

Feathers · 05-03-2010, 11:14 AM

I may be interested, 550 is the lowest you are willing to go? I need to buy an Elbow to make my hopper fit correct? what is the maintenance on this baby like. how hard to make adjustments?

ofs · 05-03-2010, 01:36 PM

Good questions Feathers!

Feathers · 05-03-2010, 02:54 PM

oh and also is there any way you could put the CO2 nipple in the but stock it seems like it might be in the way where it is now

Feathers · 05-03-2010, 02:59 PM

crud I keep coming up with more questions the more I look at this post. what are you willing to trade for... I have a TASO pump that is in decent condition I never use it dont know why I bought it lol

kenjay · 05-03-2010, 07:57 PM

Feathers, I'll send you a PM to answer your questions as well. But for others, this was not a custom job performed by myself. This was built by Extreme Sports & Hobbies and is now being sold through Rap4 since Extreme Sports & Hobbies have stopped building and selling some time ago:

M14 Pro Series Replica Paintball Gun
M14 Rifle Paintball Gun

So I have and will keep the marker as close to 'stock' as I can. If the buyer would like to further customize (ie: remove quick disconnect nipple to the stock), they are more than welcome to. Also, one screw holds the cast receiver onto the marker. Once that is removed, you can easily adjust velocity on the automag valve inside.

james · 05-03-2010, 08:26 PM

"you can clean a mag with a hammer"

03-02-2010, 09:07 PM	#1 (permalink)
kenjay Rec Poster Join Date: May 2009	For Sale: M14 Rifle Mag! Hey everyone, Have a beautiful M14 Rifle replica paintball marker for sale. Some of you will recognize this marker. Sold by Rap4 and was made by Extreme Sports & Hobbies. The marker is built around the classic Automag platform and uses a Smart Parts All-American barrel. Has a classic valve, classic rail, classic sight rail, and classic right-side feed body. The best part about this rifle, is that it's made with REAL military issued parts. The stock, barrel ferrule, steel 20 round magazine, shoulder sling, and rear sight elevation and windage knobs are all original U.S.G.I. M14 parts. The receiver is cast from the back half a real M14 receiver, because most (if not all?) of the real M14 receivers were cut up by the government before scrapping them. The stock is a fiberglass stock which was used during the war over in Vietnam. They stopped using the wood stocks because the humidity in the Jungle was causing them to swell. As you can see, the finishing on the butt plate and sling hardware is showing its age (30+ yrs) and the barrel is a little dinged up towards the tip. The valve has a quick-disconnect nipple installed for direct attachment of a remote air line. Fired her the other day, and of course still shooting great. Price: $395 paypal'ed and shipped Might, just might, be interested in partial trades. Cash must be involved. But mainly just looking for cash right now. Here's the pictures, enjoy! Click on the pics to view a larger size. If you are interested, please post here and/or send me a PM. Have all positive feedback over on AO and PbN under the same username if that needs to be seen. Thanks! Ken Last edited by kenjay; 06-22-2010 at 07:32 PM. Reason: Price Reduction

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

03-16-2010, 09:45 PM	#2 (permalink)
kenjay Rec Poster Join Date: May 2009	Still available for sale!

04-26-2010, 07:12 PM	#3 (permalink)
kenjay Rec Poster Join Date: May 2009	Anyone interested? Price was reduced to sell..$550 paypal'ed and shipped.

04-29-2010, 07:01 PM	#4 (permalink)
kenjay Rec Poster Join Date: May 2009	Priced to sell. Buy buy buy!

05-03-2010, 11:14 AM	#5 (permalink)
Feathers No Surrender No Retreat Join Date: Dec 2009 Location: Connecticut and Vermont	I may be interested, 550 is the lowest you are willing to go? I need to buy an Elbow to make my hopper fit correct? what is the maintenance on this baby like. how hard to make adjustments?

05-03-2010, 02:54 PM	#7 (permalink)
Feathers No Surrender No Retreat Join Date: Dec 2009 Location: Connecticut and Vermont	oh and also is there any way you could put the CO2 nipple in the but stock it seems like it might be in the way where it is now

05-03-2010, 02:59 PM	#8 (permalink)
Feathers No Surrender No Retreat Join Date: Dec 2009 Location: Connecticut and Vermont	crud I keep coming up with more questions the more I look at this post. what are you willing to trade for... I have a TASO pump that is in decent condition I never use it dont know why I bought it lol

05-03-2010, 07:57 PM	#9 (permalink)
kenjay Rec Poster Join Date: May 2009	Feathers, I'll send you a PM to answer your questions as well. But for others, this was not a custom job performed by myself. This was built by Extreme Sports & Hobbies and is now being sold through Rap4 since Extreme Sports & Hobbies have stopped building and selling some time ago: M14 Pro Series Replica Paintball Gun M14 Rifle Paintball Gun So I have and will keep the marker as close to 'stock' as I can. If the buyer would like to further customize (ie: remove quick disconnect nipple to the stock), they are more than welcome to. Also, one screw holds the cast receiver onto the marker. Once that is removed, you can easily adjust velocity on the automag valve inside.