|Mechanical Semi-Autos Show us what you've got, and sell them here.|
| ||Thread Tools||Search this Thread|
|06-15-2013, 08:39 PM||#1 (permalink)|
Join Date: Nov 2007
F/S: 2k+ 'Cocker RF Sleeper Build - AKA, MacDev, Benchmark, etc.!
NOW BEING PARTED OUT - PLEASE FIND THE FOR SALE POST IN MY SIGNATURE!
Going up for sale today is a 'Cocker project I set off on this winter and completed to my satisfaction. These shoddy low-light pictures don't do it any justice, but the marker itself came out just as I wished. I wanted to build my golden gun - and I don't think this is it, as much as I wanted it to be
Its going up for sale because it just isn't clicking with me the way I had hoped. I'm not a slider guy, I'm not an RF guy (travesties, I'm aware) and it just isn't everything I wanted it to be and more. I built it to be a fantastic 'Cocker with rudimentary looks - which was fairly well accomplished. It just doesn't have the "magic" for me that I was hoping it would - and thus, I'm back chasing my unicorn.
I'm hoping to find it a decent home before I'm forced to part everything out.
So, here's the specs:
- 2k+ RF Body with lighter-weight aftermarket front block and flush-mount banjo bolt
- AKA Sidewinder regulator
- Unimount style ASA
- MacDev (Sonic?) full lower internals - were new in package when installed
- Benchmark slide frame w/ trigger shoe and Hogue grips, no safety
- AKA Lightning delrin bolt w/ delrin pin
- Freak-bored WGP barrel (has a slight run-out on one side, but I've never noticed inaccuracy or anything)
- Stock STO brass 3-Way and Ram; '05 black adjustable LPR
I hope to get better pictures up with some proper lighting soon.
It is functional, but could use to be sweet-spotted as I ran out of air in the middle of doing so last time. I'd say the timing is 95% there (aka, pretty much to the best of my reasonable ability).
Everything is in what I would say is good condition for the age.
I'd like to see $180 for this package, shipped and PayPal'd within the US. If that isn't met, everything will be parted out and sold that way (needless to say, I don't want that to happen).
Any questions please ask, and thanks for looking!
Last edited by Yomillio; 06-29-2013 at 06:32 PM.
|06-27-2013, 09:18 PM||#8 (permalink)|
WVU paintball #19
Technically it's a Taso Power barrel, although the Taso branded barrels were nickle plated and had a slightly different muzzle break. It's one of my favorite old barrels. I would be interested in buying the frame and internals if you ever decide to part it out.
|06-28-2013, 01:47 AM||#9 (permalink)|
Deadbox before Dishonor
|Thread Tools||Search this Thread|